Item # ULXD4=-G50
ULX-D DIGITAL SINGLE-CHANNEL WIRELESS RACKMOUNT RECEIVER / HALF-RACK / RECEIVER COMPONENT ONLY
Item # ULXD4=-G50
ULX-D DIGITAL SINGLE-CHANNEL WIRELESS RACKMOUNT RECEIVER / HALF-RACK / RECEIVER COMPONENT ONLY
- UM: EA
- Estimated Weight: 7.0
- Brand: SHURE
The Shure ULXD4 is a half-rack, networkable wireless receiver for use with ULX-D Digital Wireless Systems.
With an expansive set of professional features, including 24-bit / 48 kHz digital audio quality, efficient and intelligent RF performance, and AES 256-bit encryption, ULX Digital offers uncompromising wireless tailored for professional sound
Frequency Band Version: 470 – 534 MHz
Features
Predictive switching diversity
High Density mode optimizes ULX-D systems to simultaneously operate significantly more channels in applications up to 30 meters
Intelligent scanning automatically finds and deploys the cleanest frequencies to transmitters over IR sync
Interference detection and alerts provided on both the receiver and Wireless Workbench 6
Front panel gain adjustment buttons provide up to 60 dB additional gain
AES 256-bit encryption-enabled for applications where secure transmission is needed
Ethernet networking provides streamlined setup across multiple receivers, Wireless Workbench 6 integration, and AMX/Crestron control
Support for frequency coordination with the Axient Spectrum Manager
Rugged metal chassis
Intuitive front panel LCD menu and controls with lockout feature
Upgraded LCD with adjustable contrast and brightness
Audio and RF LED meters with peak indicator
Remoteable ½ wave antennas
Furnished rack hardware
|
ULX-D System Specifications |
|
|
RF Carrier Frequency Range |
470–932 MHz, varies by region (See Frequency Range and Output Power table) |
|
Working Range |
100 m ( 330 ft), Note: Actual range depends on RF signal absorption, reflection and interference.Note: Actual range depends on RF signal absorption, reflection and interference. |
|
RF Tuning Step Size |
25 kHz, varies by region |
|
Image Rejection |
>70 dB, typical |
|
RF Sensitivity |
-98 dBm at 10-5 BER |
|
Latency |
<2.9 ms |
|
Audio Dynamic Range |
A-weighted, typical, System Gain @ +10 |
|
Total Harmonic Distortion |
-12 dBFS input, System Gain @ +10, <0.1% |
|
System Audio Polarity |
Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (1/4-inch) output. |
|
Operating Temperature Range |
-18°C (0°F) to 50°C (122°F), Note: Battery characteristics may limit this range. |
|
Storage Temperature Range |
-29°C (-20°F) to 74°C (165°F), Note: Battery characteristics may limit this range. |
Documents
