Item # IP-A1PA12
IP POWER AMPLIFIER 12W,EQUIPPED WITH 25 V, 70 V AND 100 V SPEAKER LINE OUTPUTS
Click image to enlarge
Item # IP-A1PA12
IP POWER AMPLIFIER 12W,EQUIPPED WITH 25 V, 70 V AND 100 V SPEAKER LINE OUTPUTS
- UM: EA
- Brand: TOA ELECTRONICS
The IP-A1PA12 is a compact 12 W amplifier which is designed to amplify audio signals received through network. It is equipped with 25 V, 70 V and 100 V speaker line outputs to drive wide range of high impedance speakers. With an external amplifier input capability, speaker(s) can be driven by internal amplifier or external amplifier by switching over. It allows integrations with IP camera systems by using ONVIF protocol, paging from IP phone systems by using SIP protocol and group broadcast by multicast streaming. Max. 20 audio files can be registered and they can be played back by control inputs or remote API (HTTP) commands.
Features:
- 12W amplifier to drive 100/70/25V line speakers
- Receive SIP audio, ONVIF Audio and Multicast
- Local broadcast using internal audio files or local audio source
- External amplifier input (100/70/25V) to share speakers between the built-in amplifer and external PA amplifier to be switched over
- 1 audio input (LINE/MIC selectable, phantom power On/Off)
- 2 control inputs, 1 control output and 1 mute control input
- HTTP commands (receive)
- Audio file storage (20 files, total 80MB, WAV/MP3)
- Playback programs (Repeat, Weekly Timer)
- PoE+ powered
| Power Source | PoE+ (IEEE802.3at Class 4) |
|---|---|
| Power Consumption | 25 W (rated output) 6 W (IEC62368-1) |
| Amplifier Rated Output | 12 W |
| Frequency Response | 100 Hz - 20 kHz |
| Audio Codec | Opus, PCMU (G.711u), PCMA (G.711a), G.722 |
| Audio Delay Time | Min. 100 ms (*1) |
| Broadcasting Mode | SIP Broadcasting/SIP calling Mode: Opus/PCMU/PCMA/G.722, P2P/SIP Server Connection Multicast Broadcasting Mode: Opus/PCMU/PCMA/G.722 Auto codec recognition, 20 ports VMS Broadcasting Mode: PCMU Internal Message Broadcasting Mode Local Broadcasting Mode: Output from LINE/MIC IN to SPEAKER OUT Note: Each broadcast mode can be assigned an order of priority using the Priority Setting function. |
| Sound Source Files | Max. 20 files (File storage capacity: 80 MB total) Supported file formats WAV file: 8/16/44.1/48 kHz sampling frequency, 8/16 bit, monaural/stereo MP3 file: 32/44.1/48 kHz sampling frequency, 64 - 320 kbps, CBR/VBR, monaural/stereo Repeat playback: Playcount (1 - 10 times), Duration (5 - 3600 sec) or Timer (from Start time to End time) Interval time: 0 - 60 sec, Delay time: 0 - 30 sec Trigger: Control Input or Remote API (HTTP) |
| Network I/F | 100BASE-TX, Auto MDI/MDI-X, RJ45 |
| Network Protocol | TCP/IP, UDP, HTTP, RTP, RTSP, RTCP, ARP, ICMP, IGMPv3, NTP, SIP (RFC3261) |
| Audio Input | 1 channel, electronically-balanced, 10 kOLINE/MIC selectable (Rated input: LINE: 0 dB (*2), MIC: -60 dB (*2)PAD function (-20 dB (*2), Phantom power ON/OFF (12 V DC), volume adjustable removable terminal block (6 pins) |
| Audio Output | 1 channel, electronically-balanced, 600 O or lessRated input: 0 dB (*2), removable terminal block (6 pins) |
| Speaker Output | High impedance 100 V line (830 O), 70 V line (420 O), 25 V line (52 O)N (100 V), N (70 V/25 V switchable), R, C removable terminal block (4pins) |
| External Amplifier Input | High impedance 100 V line, 70 V line, 25 V lineN (100 V), N (70 V/25 V switchable), R, C removable terminal block (4pins) |
| Amplifier Switching Control | Relay switchingSwithced to external amplifier when the following functions and operations are activated:mute control input, control input, system mute, remote API control and the unit power off. |
| Control Input | 2 channels, no-voltage make contact inputs, open voltage: 5 V DC, short-circuit current: 2 mA or less, removable terminal block (6 pins) |
| Mute Control Input | 1 channel, 24 V DC cut signal, control current: 5 mA or less, removable terminal block (2 pins) |
| Control Output | 1 channel, open collector output, withstand voltage: 30 V DC, control current: 150 mA or less, removable terminal block (6 pins) |
| Indicator | STATUS (green/blue/yellow/red), LINE/MIC IN (green/red), OUTPUT (green), LINK/ACT (green) |
| Clock Accuracy | ±13 seconds per month |
| Time Adjustment | Manual time setting, Time adjustment by NTP server |
| Power Outage Protection Period | 24 hours (RTC time retention, at 40 °C (104 °F) |
| Operating Temperature | -30 °C to +55 °C (-22 °F to 131 °F) |
| Operating Humidity | 90 %RH or less (no condensation) |
| Finish | Front case: Surface-treated steel plate, black, paintRear chassis: Surface-treated steel plate |
| Dimensions | 210 (W) x 44 (H) x 81.5 (D) mm (8.27" x 1.73" x 3.21") (excluding projection) |
| Weight | 940 g (2.07 lb) |
| Included Accessories | Removable terminal plug (6 pins, preinstalled on the unit) x 2, Removable terminal plug (2 pins, preinstalled on the unit) x 1, Rubber feet x 4, Mounting screw (M3 x 6) x 4 |
| Optional Accessories | Rack mounting bracket: MB-15B-BK (for rack mounting one IP-A1PA12 unit) (*3)Wall mounting bracket: MB-15B(for wall mounting) |
Documents
×
This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our cookies and terms of use policy.