Item # EVID C8.2
8" COAXIAL CEILING SPEAKER WITH HORN LOADED TI COATED TWEETER - 70V OR 8OHM, BACK CAN ENCLOSURE
Item # EVID C8.2
8" COAXIAL CEILING SPEAKER WITH HORN LOADED TI COATED TWEETER - 70V OR 8OHM, BACK CAN ENCLOSURE
- UM: PR
- Estimated Weight: 32.0
- Brand: ELECTRO-VOICE / BOSCH
The Electro-Voice EVID C8.2 loudspeaker system is a complete two-way ceiling loudspeaker package. The package consists of a bezel assembly, grille, rear enclosure, 8-inch coax two-way loudspeaker and internal line-matching transformer. The loudspeaker features a waveguide coupled titanium coated dome tweeter. The EVID C8.2 loudspeaker utilizes a 2nd order crossover network at 2.5 kHz, with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels. The C8.2 utilizes a transformer that offers a selection of 1.88 (70-V only), 3.75, 7.5, 15 or 30 watts delivered to the loudspeaker system using either 70-V or 100-V lines, or 8 ohm bypass.
Features
Ported enclosure for extended bass response
Waveguide-coupled 1-inch titanium-coated tweeter
Full-bandwidth overload protection
Integrated transformer for 70 V, 100 V, or 8 O use
Front-panel mode/wattage selector
Safe, easy installation with included tile bridge and mounting ring
White semi-gloss perforated grille
Complete package, requires no additional accessories
|
Freq. Response (-10 dB): |
50 Hz - 20 kHz |
|
Coverage (Conical): |
110° |
|
Power Handling: |
75 W Cont. / 300 W Peak |
|
Sensitivity (SPL 1W/1m): |
91 dB |
|
Max Calculated SPL: |
110 dB Cont. / 116 dB Peak |
|
Impedance: |
8 Ohms nominal (transformer bypass) |
|
Network: |
Network and transducers protected, 12 dB/oct 2.6 kHz |
|
LF Transducer: |
8 in. (200 mm) Polypropylene cone |
|
HF Transducer: |
1 in (25 mm) Ti Mylar laminate |
|
Transformer Taps: |
70V: 1.88, 3.75, 7.5, 15 or 30w 100V: 3.75, 7.5, 15 or 30W Bypass: 8 Ohms |
|
Connectors: |
C8.2: Phoenix type removable, with screw terminals and "loop-thru", accepts 12 ga wire C8.2D: Fire-safety rated input block, 3 terminal barrier strip accepts 12 ga wire |
|
Enclosure Material: |
Baffle- UL 94V-O rated ABS Backcan-Zinc plated steel |
|
Grille: |
Perforated powder coated steel with safety tether |
|
Support Hardware: |
Tile bridge, backing plate support, cutout template, paint shield |
|
Dim (H x Dia.): |
10.0" x 10.6 (255mm x 270mm) |
|
Cutout Size: |
10.75" (272mm) |
|
Net Weight (each): |
11.0 lbs (5.0 kg) |
|
Shipping Weight (pair): |
24.0 lbs (11.0 kg) |
|
Safety Agency Ratings: |
UL 1480 Safe for use in air handling spaces per UL 2043. |
Documents
