Power Source

120 V AC, 60 Hz

Power Consumption

690 VA (at rated output), 260 W (According to UL60065), 63 W (at no signal)

Rated Output

240 W, 21 O (according to UL60065); 200 W, 25 O (according to UL2572); 200 W, 25 O (according to CAN/ULC-S576 with separate UPS); 100 W, 50 O (according to CAN/ULC-S576); (All total of Speaker output 1 – 6 and Direct Output)

Frequency Response

50 Hz – 20 kHz, ±3 dB (at 1/3 rated output), 800 Hz – 2.8 kHz (according to UL2572); 400 Hz – 4 kHz (according to CAN/ULC-S576)

Distortion

Under 0.7% (at rated output, 1 kHz)

S/N Ratio

Over 85 dB

Audio Input/Output Characteristic

Sampling frequency 48 kHz, A/D D/A CONVERTER: 24 BIT

Input

Input 1 – 3: –50 dB* (MIC) / –10 dB* (LINE) (changeable), 600O, electronically balanced, combined XLR connector (female) / phone jack, Input 4: –50 dB* (MIC) / –10 dB* (LINE) (changeable), 600O, electronically balanced, removable terminal block (14 pins), BGM 1 – 2: –10 dB*, 10 kO, unbalanced, RCA pin jack, External AMP Input: 70 V line, removable terminal block (14 pins)

Output

Speaker output 1 – 2: Max. (240 W) per output, Speaker output 3 – 6: Max. (100 W) per output, Speaker output 1 – 6: Total within rated output, removable terminal block (14 pins), Allowable minimum load: 245 O (20 W) at 70 V line for speaker line failure detection, Direct output: Direct output from internal or external amplifier, removable terminal block (16 pins), Recording output BGM/Paging: 0 dB*, 10 kO, unbalanced, RCA pin jack, Ground faults detection: 0 O, Wire to wire faults detection: 0 O

RM Link

Input 1 – 2: Connecting the RM-300MF/200M Remote Microphone, RJ45 female connector, Maximum distance: Total 800 m between this unit and remote microphones, Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)

Network I/F

10BASE-T/100BASE-TX (selectable by automatic negotiation), RJ45 female connector; Maximum distance: 100 m between this unit and a switching hub; Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)

VM Link

Output: Connecting the VM-3240E, RJ45 female connector; Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)

General Control

Input 1 – 8: No-Voltage make contact input, open voltage: 24 V DC, short-circuit current: 2 mA or less, removable terminal block (14 pins); Output 1 – 8: Isolated open collector output, withstand voltage: 30 V DC,operating current: 10 mA or less, removable terminal block (14 pins)

Power Input/Output

Power in: Connecting the VX-2000DS only (operating range: 20 – 40 V DC); PS out: 28 V DC / 18 A; M4 screw terminal, distance between barriers: 11 mm

22 V DC Output

22 V DC Special Application, Maximum feeding current 0.3 A (for RM-200M only)

DS Link

Connecting the VX-2000DS, RJ45 female connector; Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)

Finish

Panel: Aluminum, hair-line, black; Case: Surface-treated steel plate, black, paint

Operating Temperature

0 to 49°C (32 to 120°F)

Operating Humidity

5% to 95% RH (no condesnsation)

Dimensions

482 (W) × 132.6 (H) × 431.2 (D)mm (18.98” x 5.22” x 16.98”)

Weight

16.5kg (36.38 lbs)

Accessories

AC power cord (2m) × 1, Emergency microphone × 1, Plastic foot × 4, Plastic foot mounting screw × 4, Removable terminal plug (14 pins) × 3, Removable terminal plug (16 pins) × 1, Link cable (3m) × 2, Setting software (CD) × 1

Option

Input transformer: IT-450

UL Certified

UL 2572