The loudspeaker is a high-output, three-way full-range system designed for sound reinforcement. It features two 15-inch low-frequency drivers, four 8-inch mid-frequency drivers, and six 1.5-inch exit high-frequency drivers. The system provides a 60° horizontal dispersion pattern.

Features:

• Line array module optimized for permanent install
• High output with 6 HF, 4 MF, and 2 LF drivers
• Advanced transducers for low weight and high output
• Comprehensive rigging points for line array setup
• Rugged DuraFlex™ exterior finish and weatherized components



Frequency Range	41 - 20 kHz
Frequency Response (-6 dB)	45 - 19.5 kHz
Horizontal Coverage	60° nominal (500 Hz – 16 kHz)
System Power Ratings (AES)	LF 1000W, MF 550W, HF 300W Continuous (IEC / 100 hour)
Maximum SPL (1m)	150.7 dB
Nominal Impedance	4 ohms
Sensitivity (2.83V @ 1m)	LF 99/96 dB, MF 104 dB, HF 114/111 dB
LF Driver	2 x JBL 2265H 15in, dual 3in voice coil, Neodymium Differential Drive
Mid-Frequency Driver	4 x JBL 2169H 8in, dual 3in voice coil, Neodymium Differential Drive
High-Frequency Driver	6 x JBL 2432H 1.5in exit compression driver, 3in voice coil, Neodymium Magnet