VLA-C2100-GR | TWO-WAY FULL RANGE LOUDSPEAKER WITH 2 X 10" DIFFERENTIAL DRIVE
Item # VLA-C2100-GR
TWO-WAY FULL RANGE LOUDSPEAKER WITH 2 X 10" DIFFERENTIAL DRIVE
VLA-C2100-GR is a two-way full-range loudspeaker featuring dual 10-inch Differential Drive low-frequency drivers with 3-inch voice coils. The high-frequency section uses three D2415 drivers with 1.5-inch diameter annular diaphragms, 1.5-inch voice coils, and neodymium magnets, mounted on a horn for controlled dispersion and sensitivity.
The enclosure is constructed from multi-layer reinforced fiberglass with steel end panels. The baffle is made of 14-gauge zinc-plated, powder-coated perforated steel backed by acoustically transparent black cloth, a hydrophobic mesh, and a waterproof rail system. The integrated rigging system allows selection of inter-box angles during array assembly. Available accessories include a rigging frame, pull-back bar, and cardioid kit for subwoofer configuration.
Features:
- Compact line array module
- Optimized for permanent installation
- Advanced component transducers
- Low weight
- High output
- Outdoor IP55 rated enclosure
- Dust and water protection
- Comprehensive rigging points
- Line array configuration
- Fiberglass construction
- Weatherized components
- Bi-amplification capability
- Passive feeding option
- 100° horizontal coverage
- Maximum SPL
| Frequency Range (-10dB) | 86 Hz - 18 kHz |
|---|---|
| Frequency Response (±3 dB) | 109 Hz – 15.3 kHz |
| Power Full Range | 800 W Continuous Pink Noise (3200 W peak), 2 hrs; 400 W Continuous Pink Noise (1600 W peak), 100 hrs |
| Power Bi-amp LF | 800 W Continuous Pink Noise (3200 W peak), 2 hrs; 400 W Continuous Pink Noise (1600 W peak), 100 hrs |
| Power Bi-amp HF | 150 W Continuous Pink Noise (600 W peak), 2 hrs; 50 W Continuous Pink Noise (200 W peak), 100 hrs |
| Maximum SPL (1m) | 131 dB continuous average (2 hrs), 137 dB peak |
| Coverage Pattern (-6 dB) | Horizontal 100° (+5°/-15°, 1.5 kHz to 15 kHz), Vertical varies with array size and configuration |
| Amplifiers | Crown DCi Family with DSP onboard; Recommended models: Crown DCi 2|1250N, DCi 4|1250N/ND/DA, DCi 2|2400N, DCi 4|2400N |
| LF Driver | 2 x 2261FF 254 mm (10 in) diameter with two 76 mm (3 in) voice coils, Neodymium Differential Drive, Direct Cooled |
| HF Driver | 3 x 2415K D2 Dual Diaphragm Dual Voice Coil Compression Drivers with two 38 mm (1.5 in) voice coils; 21 mm (0.8 in) exit |
Downloads