Item # ULXD1=-G50
ULX-D DIGITAL WIRELESS BODYPACK TRANSMITTER WITH TA4M CONNECTOR / BODYPACK COMPONENT ONLY
Item # ULXD1=-G50
ULX-D DIGITAL WIRELESS BODYPACK TRANSMITTER WITH TA4M CONNECTOR / BODYPACK COMPONENT ONLY
- UM: EA
- Estimated Weight: 1.0
- Brand: SHURE
The ULXD1 is a wireless bodypack transmitter compatible with ULX-D Digital Wireless Systems.
With a rugged yet lightweight aluminum case, the ULXD1 delivers uncompromising audio quality and RF performance, AES 256-bit encryption for secure transmission, and advanced rechargeability options for professional sound reinforcement applications.
Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.
Features
24-bit/48 KHz digital audio that exceeds all other systems in accurate reproduction of the source material
20 Hz – 20 KHz frequency range with flat response
Greater than 120 dB dynamic range for excellent signal-to-noise performance
Advanced Encryption Standard (AES-256) for any application where secure transmission is needed:
AES algorithm used in Shure ULX-D Wireless has been validated (validation no: 2552) by the National Institute of Standards and Technology (NIST) as conforming to the Advanced Encryption Standard (AES) Algorithm, as specified in Federal Information Processing Standard (FIPS) Publication 197, Advanced Encryption Standard
Added benefit of eliminating stray RF interference by allowing only encrypted signal through to the receiver
Built-in limiter circuitry prevents digital audio clipping from excessive signal levels.
60 dB of adjustable system gain easily accessible from the receiver front panel
No transmitter gain adjustments needed - optimized for any input source
Wide selection of trusted Shure Microphones
System Specifications |
|
RF Carrier Frequency Range |
470–932 MHz, varies by region (See Frequency Range and Output Power table) |
Working Range |
100 m ( 330 ft) (Note: Actual range depends on RF signal absorption, reflection and interference.Note: Actual range depends on RF signal absorption, reflection and interference.) |
RF Tuning Step Size |
25 kHz, varies by region |
Image Rejection |
>70 dB, typical |
RF Sensitivity |
-98 dBm at 10-5 BER |
Latency |
<2.9 ms |
Audio Dynamic Range |
A-weighted, typical, System Gain @ +10 |
Total Harmonic Distortion |
-12 dBFS input, System Gain @ +10 <0.1% |
System Audio Polarity |
Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (1/4-inch) output. |
Operating Temperature Range |
-18°C (0°F) to 50°C (122°F) (Note: Battery characteristics may limit this range.) |
Storage Temperature Range |
-29°C (-20°F) to 74°C (165°F) (Note: Battery characteristics may limit this range |
Documents