Item # TX-LC2
UNBALANCED TO BALANCED LINE COMBINER, PS-24AS RECOMMENDED POWER SUPPLY ( NOT INCLUDED )
Item # TX-LC2
UNBALANCED TO BALANCED LINE COMBINER, PS-24AS RECOMMENDED POWER SUPPLY ( NOT INCLUDED )
- UM: EA
- Estimated Weight: 1.0
- Brand: RDL
The TX-LC2 is the ideal choice in installations requiring the active, isolated mixing of two unbalanced line-level audio sources to feed a balanced (or unbalanced) audio line.
The input circuits are high-impedance, line-level (-10 dBV) and are isolated from each other. Therefore the modules may be used to bridge an unbalanced stereo source without affecting the stereo separation. The output from the TX-LC2 is a mono mix of the stereo signal. Gain of the combined signals is adjustable from -10 to +10 dB (rel. +4 dBu output).
The TX-LC2 may also be used to mix two separate sources into a single output. The mixing circuit in the module is an active summing amplifier.
The output driver provides a 150 Ω balanced source to drive high or low impedance, balanced or unbalanced lines. The TX-LC2 is operated from a 24 Vdc power supply, and with reduced headroom it may be operated from a 12 Vdc power supply.
The input connectors make connection of the TX-LC2 easy. The broad gain range makes the TX-LC2 ideally suited to any installation where a balanced mono signal is needed from a stereo unbalanced source, particularly low-output consumer products such as certain televisions.
Use the TX-LC2 individually, or combine it with other RDL modules and accessories as part of a complete audio/video system.
Features:
- Mix 2 Unbalanced Audio Signals to Mono Balanced
- Combine Stereo Into Mono with Balanced Output
- Output Gain Trim
- Isolation Between Inputs
- Unbalanced to Balanced Conversion
- High-Quality Audio
| Dimensions | Height: 1.4 in. 3.6 cm Length: 3.0 in. 7.6 cm Width: 1.2 in 3.0 cm |
|---|---|
| Inputs (2) | -10 dBV nominal, -22 dBV minimum |
| Input Impedance | 10 kΩ |
| Noise | < -85dB below +4 dBu (-10 dBV input @ 12 dB gain) |
| THD+N | < 0.005% |
| Frequency Response | 10 Hz to 20 kHz (± 0.25 dB into bridging input)25 Hz to 20 kHz (± 0.25 dB into 600 Ω) |
| Gain | ±10 dB (rel. +4 dBu balanced output, adjustable) |
| IMD | > 0.001% |
| Output | 150 Ω balanced, +4 dBu to drive low or high impedance, balanced or unbalanced lines |
| Headroom | > 18 dB |
| Ambient Operating Environment | 0° C to 55° C |
| Power Requirement | GROUND-REFERENCED, 24 Vdc @ 30 mA |
| Package Type | Cardboard Box |
| WEEE weight | 0.195 lbs. |
| Shipping Weight | 0.255 lbs. |
| Tariff code | 8543.70.9860 |
| Package Dimensions | 2 x 2 x 4 in. |
Documents