ST-OSC2A | AUDIO OSCILLATOR - 1KHZ AND 10 KHZ
Item # ST-OSC2A
AUDIO OSCILLATOR - 1KHZ AND 10 KHZ
Click image to enlarge
The ST-OSC2 products feature RDL''s SupplyFlex power input configuration. The module will operate directly from floating 24 Vdc or bipolar dc power. If a jumper is connected between the POWER minus terminal and any module ground, the module power becomes ground-referenced.
Features:
- Precision Sine-Wave Audio Signal
- Amplitude-Stable Oscillator
- Two Single-Tone Oscillators
- 1 kHz and 10 kHz
- Precise User-Adjustable Levels
- Each Oscillator Has Two Separate Outputs
- RDL SupplyFlex Power Input Configuration
| Outputs | 2 for each oscillator, bal. or unbal. |
|---|---|
| Output Impedance | 200 Ω to drive high or low Z lines |
| Nominal Frequencies | |
| ST-OSC2A | 1 kHz and 10 kHz |
| ST-OSC2B | 100 Hz and 400 Hz |
| THD+N | |
| ST-OSC2A | 0.5% |
| ST-OSC2B | < 3% |
| Output Level | Off to +10 dBu (adjustable) 600 Ω load. Level Maintained by internal AGC circuit |
| Ambient Operating Environment | 0° C to 55° C |
| Power Requirement | GROUND-REFERENCED or FLOATING, 24 Vdc @ 80 mA |
| Package Type | Cardboard Box |
| Tariff code | 8543.20.0000 |
| WEEE weight | 0.165 lbs. |
| Shipping Weight | 0.215 lbs. |
| Package Dimensions | 2 x 2 x 4 in. |
Downloads
×
This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our cookies and terms of use policy.