Item # SLXD1=-G58
BODYPACK TRANSMITTER FOR SLX-D SYSTEMS / TRANSMITTER COMPONENT ONLY
Item # SLXD1=-G58
BODYPACK TRANSMITTER FOR SLX-D SYSTEMS / TRANSMITTER COMPONENT ONLY
- UM: EA
- Estimated Weight: 1.0
- Brand: SHURE
SLX-D Digital Wireless delivers clear audio and stable RF performance with easy setup and rechargeability options. SLX-D is built to handle a wide range of applications, from day-long conferences to nighttime performances.
Automatic channel scan and IR sync are even easier with a guided setup feature programmed into each SLX-D wireless receiver. Manage multiple-system group scans and firmware updates with third-party setup and control via Ethernet. Operate up to 32 compatible systems per 44 MHz band for up to 8 hours from 2 AA batteries, or add Shure SB903 rechargeable batteries and charger accessories. SLX-D provides >118 dB dynamic range and stable, efficient RF transmission for a selection of handheld, lapel and headset microphones.
Features
Transparent 24-bit digital audio
Extended 20 Hz to 20 kHz frequency range (microphone dependent)
118 dB dynamic range
Digital predictive switching diversity
44 MHz tuning bandwidth (region dependent)
32 available channels per frequency band (region dependent)
Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
Easy pairing of transmitters and receivers over IR scan and sync
Automatic channel scan
Link multiple receivers for group scan and firmware updates via Ethernet port
Compatible with Shure Wireless Workbench® control software
Remote monitoring and control via ShurePlus Channels app
Third-party setup and control via Ethernet
Elegant and easy-to-use interface with high-contrast LCD menu
Guided setup mode installed in each SLX-D receiver
Transmitters use 2 AA batteries or Shure SB903 rechargeable battery
System configurations include handheld transmitters with interchangeable microphone capsules, bodypacks with a range of lapel, headset and instrument microphones and single and dual rack-mountable receivers.
|
System |
|
|
RF |
|
|
RF Carrier Frequency Range |
470–937.5 MHz, varies by region (See Frequency Range and Output Power table) |
|
Working Range |
100 m ( 328 ft) |
|
RF Tuning Step Size |
25 kHz, varies by region |
|
Image Rejection |
>70 dB, typical |
|
RF Sensitivity |
-97 dBm at 10-5 BER |
|
Audio |
|
|
Latency |
3.2 ms |
|
High-Pass / Low Cut Filter |
150 Hz @ -12 db/oct |
|
Audio Frequency Response |
20 Hz– 20 kHz (+1, -2 dB) |
|
Audio Dynamic Range |
118 Db at 1% THD, A-weighted, typical |
|
Total Harmonic Distortion |
<0.02% |
|
System Audio Polarity |
Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (with respect to the ring of the 6.35 mm output) output. |
|
Mic Offset Range |
0 to 21 dB (in 3 dB steps) |
