Item # RU-MLD4

MICROPHONE / LINE DISTRIBUTION AMPLIFIER - 1X4

  • MAP: $374.64 / EA
  • List Price: $499.52 / EA
  • Log in to see if custom discounts apply
    Click image to enlarge

    Item # RU-MLD4

    MICROPHONE / LINE DISTRIBUTION AMPLIFIER - 1X4

    • UM: EA
    • Estimated Weight: 2.0
    • Brand: RDL

    The RU-MLD4 is a four channel audio distribution amplifier. The input and all four outputs may be connected through the front-panel XLR jacks or on the rear panel detachable terminal blocks. The input accepts either a balanced microphone or line level signal. Each of the four outputs provides either a microphone or line level signal. Both the front-panel XLR connectors and the rear-panel terminals are active at all times.

    The audio input is equipped with a rear-panel switch to select between MIC and LINE level. Two additional switches allow setting the MIC input for LO or HI gain and for enabling or disabling standard 24 Vdc phantom. The two microphone gain settings allow the connection of a wide variety of dynamic and condenser microphones. Each output is provided with a separate rear-panel switch to set the associated level to either MIC or LINE. Audio outputs are isolated from each other and may be wired balanced or unbalanced. Gain trim is provided on a front-panel control. An RDL Dual-led VU meter is provided above the gain trimmer. The meter is calibrated to indicate +4 dBu for outputs set to line level. The rear panel provides a detachable terminal block and a power input jack to connect 24 Vdc power. Each output of the RU-MLD4T is equipped with a studio-quality audio output transformer.

    Features:

    • Distribution Amplifier with Four Outputs
    • Front Panel XLR Input / Output Jacks
    • Detachable Input / Output Terminal Blocks
    • Switch-selectable Mic or Line Input
    • Switch-selectable Mic Gain and Phantom
    • Gain Trim on Input
    • Each Output Switch-selectable Mic or Line
    Inputs XLR(front)
    detachable term block(rear)
    Input level (for +4 dBu output) Switch-selectable (rear panel) MIC/LINE
      Mic -48 dBu to -3 dBu (LO GAIN)
    -65 dBu to -20 dBu (HI GAIN)
      Line -15 dBu to +28 dBu
    Input Impedance
      Mic 2 kΩ balanced, switchable 24 V phantom (IEC 61938: 2013)
      Line > 10 kΩ balanced
    may be connected unbalanced
    Outputs (4) XLR(front)
    detachable term block(rear)
    Output level Switch-selectable (rear panel) MIC/LINE
    Output Impedance 150 Ω balanced
    Gain Trim Front panel adjustable
      Mic Off to 52 dB gain (LO GAIN)
    Off to 69 dB gain (HI GAIN)
      Line Off to 20 dB gain
    Frequency Response
      Mic 80 Hz to 50 kHz (± 0.75 dB)
    < 10 dB @ 20 Hz (integral high-pass filter)
      Line 15 Hz to 50 kHz (± 0.1 dB)
    THD+N < 0.1% (Mic)
    < 0.005% (Line)
    CMRR > 60 dB (Mic)
    > 50 dB (Line)
    Residual Noise (below +4 dBu LINE outputor -45 dBu MIC output)
      Mic -79 dB (50dB Gain)
    -70 dB (Mic 60dB Gain)
      Line -85 dB
    Headroom > 20 dB (above +4 dBu LINE output)
    Ambient Operating Environment 0° C to 55° C
    Power Requirement GROUND-REFERENCED, 24 Vdc @ 90 mA
    Package Type Cardboard Box
    Tariff code 8543.70.9860
    WEEE weight 1.235 lbs.
    Shipping Weight 1.48 lbs.
    Package Dimensions 6 x 6 x 2.625 in.

    Documents

    Loading
    Item Added to Cart
    View Cart
    Wishlist Updated
    View Wishlist
    This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our cookies and terms of use policy.