Item # MX202B/C
CARDIOID BLACK MINI-CONDENSER FOR OVERHEAD MIKING, 30' CABLE, IN-LINE PREAMP, 4" GOOSENECK
Item # MX202B/C
CARDIOID BLACK MINI-CONDENSER FOR OVERHEAD MIKING, 30' CABLE, IN-LINE PREAMP, 4" GOOSENECK
- UM: EA
- Estimated Weight: 1.0
- Brand: SHURE
The Shure MX202B/C is a discreet, high-performance overhead condenser microphone featuring a cardioid pickup pattern, designed for clear and accurate sound capture in speech, vocal, and ensemble applications. Part of the renowned Microflex® series, this black-finished mic is equipped with a flexible 4" gooseneck and comes with a 30-foot detachable cable terminating in a mini XLR connector. The included preamp module ensures clean signal output and supports phantom power operation. Optimized for hanging installation, the MX202B/C is ideal for use in houses of worship, choir miking, conference rooms, theatrical productions, and any environment requiring unobtrusive overhead audio capture. The cardioid capsule provides focused pickup while minimizing ambient noise and feedback, delivering excellent vocal intelligibility and sound reinforcement accuracy. Trusted by integrators worldwide, the MX202B/C is built for consistent performance in permanent and semi-permanent AV installations.
Features
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges that provide an optimal polar pattern choice for each application
Balanced, transformerless output for increased immunity to noise over long cable runs
Supplied stand-mount adapter for portable applications (in-line preamplifier versions only)
Bright-white or black finish that blends unobtrusively with most surroundings
Preamp options available offer easy installation in ceilings or microphone stands
When combined with the high sensitivity cartridge's wide frequency response, these microphones provide accurate sound reproduction with minimum RF interference or electromagnetic hum
Frequency Response |
50 to 17,000 Hz |
Output Impedance |
EIA Rated at 150 ? (180 ? actual) |
Sensitivity (At 1,000 Hz, open circuit voltage*) |
Cardioid: –35.0 dBV/Pa (17.8 mV) , Supercardioid: –33.5 dBV/Pa (21.1 mV), Omnidirectional: –27.5 dBV/Pa (42.2 mV), *1 Pascal = 94 dB SPL |
Maximum SPL (1 kHz at 1% THD, 1 k? load) |
Cardioid: 124.2, Supercardioid: 122.7 dB, Omnidirectional: 116.7 dB |
Equivalent Output Noise (A-weighted) |
Cardioid: 28.0 dB SPL, Supercardioid: 26.5 dB SPL, Omnidirectional: 20.5 dB SPL |
Signal to Noise Ratio (referenced at 94 dB SPL) |
Cardioid: 66.0, Supercardioid: 67.5 dB, Omnidirectional: 73.5 dB |
Dynamic Range at 1 k? Load |
96.2 dB |
Common Mode Rejection |
45.0 dB minimum |
Preamplifier Output Clipping Level (1% THD) |
–6.0 dBV (0.5 V) |
Polarity |
Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector. |
Power Requirements |
11 to 52 Vdc phantom, 2.0 mA |
Environmental Requirements |
Operating Temperature Range: –18° C to 57° C (0° F to 135° F) , Relative Humidity: 0 to 95% |
Documents