Item # LUCIA 240/1-70_US1
COMPACT MONO 240 W AMPLIFIER FOR HIGH IMPEDANCE 70 V INSTALLATION APPLICATIONS
Item # LUCIA 240/1-70_US1
COMPACT MONO 240 W AMPLIFIER FOR HIGH IMPEDANCE 70 V INSTALLATION APPLICATIONS
- UM: EA
- Brand: LAB.GRUPPEN
General Specifications
|
Number of amplifier channels |
1 |
|
Max total output all channels driven |
240 W |
|
Max output voltage |
100 Vpeak |
|
Max output Current |
7 Arms |
Performance
|
70 V |
240 W |
|
100 V 1 |
120 W |
|
16 ohms |
240 W |
|
Signal to Noise Ratio |
>100 dBA |
Gain, Sensitivity and Limiters
|
VPL |
100 Vpeak |
|
Sensitivity, balanced input |
4 dBu / 1.23 Vrms |
|
Sensitivity, RCA input |
-2 dBu / 0.62 Vrms |
|
Input headroom for clip, balanced 2 |
12 dBu / 3.09 Vrms |
|
Input headroom for clip, RCA 2 |
6 dBu / 1.55 Vrms |
Connectors and Buttons
|
Input connectors (per ch.) |
3 - pin detachable screw terminals, electronically balanced |
|
Input connectors (ch. 1 & 2) |
Unbalanced RCA type |
|
Output connector |
2 - pin detachable screw terminal |
|
GPI 3 |
2 channels of voltage sense type. 4 pins in a detachable screw terminal. Default functionality is output level for GPI1 and wake up from stand by for GPI2. |
|
GPO (power state output) 3 |
Contact closure type, 2 pins in a detachable screw terminal Default for external monitoring of fault/protection/power off |
|
USB |
For firmware update and configuration of the signal processing and altering the default functions of the GPI ports |
|
High pass filter |
This filter is in series with the other filters in the DSP and it is controlled with switches on the back. Settings OFF / 50 Hz / 80 Hz. |
|
Level adjustment (per input) |
Front panel potentiometer, detented from -inf to 0 dB |
|
RS232 |
Can be controlled and monitored by third parties via RS232 using both the GPI pins |
Processing Features
|
Input processing block 4 |
4 EQ sections per input |
|
Mix matrix routing block 4 |
2 in - 1 out mix-matrix controllable from GPI |
|
Output processing block 4 |
4 EQ sections per output (presets available for many loudspeakers) User adjustable output look ahead limiter ADLC (Adaptive ISO 226 compensation) |
|
Latency from any input to any output |
User adjustable from 9.15 to 137 ms |
Power
|
Nominal voltage |
100 – 240 VAC |
|
Operating voltage |
85 – 265 VAC |
|
Standby consumption |
<1 W |
|
Mains connector |
IEC inlet |
|
Cooling |
One fan, no filter required, front to rear airflow, temperature controlled speed. Can stay off if the sustained power average stays below 12 W and the ambient temperature is below 25 C |
|
Auto mode |
The power state is controlled automatically by the audio signal |
Dimensions
|
Dimensions |
W: 216 mm (8.5”), H: 44 mm (1 U), D: 280 mm (11”) |
Weight
|
Weight |
1.9 kg (4.2 lbs) |
Finish
|
Finish |
Black aluminum front and black steel chassis |
Approvals
|
Approvals |
CE, CSA, CCC, PSE, FCC, Energy Star |