JBL-MTC-CSTETH1 | SAFETY TETHER, CS GRILLES (1=PACK OF 10)
Item # JBL-MTC-CSTETH1
SAFETY TETHER, CS GRILLES (1=PACK OF 10)
Click image to enlarge
JBL’s MTC-CS-Teth1 is a kit of 10 retrofit safety tethers that work with JBL press-in-grille type ceiling loudspeakers (Control 10 Series, 20 Series, 40 Series, and 226). If a grille were to work its way loose, the tether is intended to catch it and keep it from falling to the ground where it could otherwise cause damage or harm. The tether consists of a short length of flammability-rated aramid tether cord and an adhesive tab. The thread end attaches through the perf holes on the press-in grille, and the tab has a peel-off adhesive, making it easy for the installer to stick it onto the speaker baffle. The cord is a rattle-free material.
| Tether Cord | Stranded Aramid Fiber; High Temperature = 204°C ; Low Temperature = -196°C |
|---|---|
| Tab | Phenolic Resin FR-1 with 3M 5611A VHB pressure sensitive adhesive (full adhesion in 24 hours) |
| Flammability | Tether Cord ASTM D6413, non-igniting & self-extinguishing ; Baffle Tab UL94-V0 |
| Pull Rating | 3 kg (min. 10-to-1 safety factor on all JBL Pro press-in grille) |
Downloads
×
This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our cookies and terms of use policy.