The IR+ Control Center offers both Wi-Fi and Infrared audio transmission options, with Infrared being particularly suitable for assistive audio in spacious environments or for secure transmission within enclosed spaces. By connecting the IR M1 to a Wi-Fi multicast router or an in-house network, users can stream audio over Wi-Fi to the Williams AV WaveCAST app (available in the iOS app store or Google Play store).
Featuring a distributed infrared emitter array architecture, the IR+ Control Center accommodates up to four emitters, which can be either stacked for large room arrays or strategically distributed throughout the venue to accommodate various room layouts, including wings, balconies, or other obscured locations.
*Note: Firmware is model specific. Firmware updates are currently unable to be completed on Mac computers.
|
Dimensions: |
19” (W) x 1.75” (H)
x 8.2” (D) |
|
Weight: |
5.2lb. (2.4 kg) |
|
Color: |
Black |
|
Rack Mount: |
Single Rack Unit |
|
Power Supply: |
International
Desktop Supply |
|
Power Switch: |
Rocker switch with LED |
|
Signal to Noise Ratio: |
67 dB (typical) |
|
Modulation: |
FM Wideband, +50kHz deviation, 50uS pre-emphasis |
|
Carrier Frequency: |
Selectable, 2.3/2.8 or 3.3/3.8MHz |
|
Frequency Response: |
40 to 16,000Hz, +1 dB, -3dB, electrical response |
|
Total Harmonic Distortion: |
Less than 2%, electrical response |
|
Audio Processor Functions: |
DSP based; Compression 1:1, 1.5:1, or 2:1; High-pass and low-pass filter frequency control |
|
Auto Carrier Shut-Off: |
Adjustable timer shuts off carrier when no audio is present. Adjustable through webpage. |
|
Audio Input: |
(2x) Combination 3-pin XLR, 1/4” (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power |
|
Dante: |
Optional |
|
Internal Test Tone: |
400 Hz internal test tone selectable as audio input source for setup and diagnostics |
|
Remote Configuration: |
Available through embedded website |
|
Headphone Output: |
(2) 1/4? headphone jacks on front panel for monitoring CH A and CH B audio inputs |
|
Emitter Output Jack: |
Four RJ-45 ports for CAT5e cables; provides +48VDC Power, RS-485 communication, and Baseband signals for IR transmission. |
|
Operating requirements: |
0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere |
|
Approvals: |
CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI |
|
Warranty: |
2 years on Modulator, 90 days on accessories |