Item # FP-TPSR4A
FORMAT-A AUDIO SENDER/RECEIVER (COMPATIBLE WITH GUEST ROOM AUDIO SYSTEM)
Item # FP-TPSR4A
FORMAT-A AUDIO SENDER/RECEIVER (COMPATIBLE WITH GUEST ROOM AUDIO SYSTEM)
- UM: EA
- Brand: RDL
The FP-TPSR4A is a sender and receiver that provides the interface between a hotel room television and listening stations and audio input panels.
The Sender Section is an RDL Format-A audio sender that accepts either a stereo line-level or 1 to 3 Watt mono amplified fixed-level signal, usually from a commercial hospitality equipped TV. The FP-TPS4A distributes the source signal to two Format-A RJ45 output jacks to feed multiple Format-A receivers.
The input accepts either an unbalanced stereo or an amplified mono input. The FP-TPSR4A sends the unbalanced Left and Right sources over balanced twisted-pair cables on pairs B and C. If a mono amplified signal is connected, the mono source is fed to both pairs B and C. Audio circuitry is active balanced for superior audio fidelity and low-noise performance.
The Receiver Section is an RDL Format-A receiver with an RJ45 input fed by sender modules such as the D-TPS8A stereo input panel for portable computer or media player. Audio signals received on pairs B and C are amplified to feed two stereo RCA connectors at a standard -10 dBV consumer level. One of these outputs connects to the TV AUX input, the other is available to feed the input of a stereo amplifier in the room.
The FP-TPSR4A is normally mounted behind a TV where AC power is available. A 24 Vdc power supply, available separately, provides power to the FP-TPSR4A and to the connected sending and receiving modules. It is not necessary to connect power supplies to the connected senders and receivers, facilitating installation. A front-panel blue LED is illuminated when the FP-TPSR4A is receiving and distributing 24 Vdc to all three RJ45 jacks. The distributed output dc voltage is short-circuit protected by an automatically resetting fuse. A power fault on either output jack causes the blue LED to extinguish.
The FP-TPSR4A is ideally suited to guest room installations with bedside and restroom listening stations. The inputs and outputs are fully compatible with all RDL Format-A receivers.
Features:
- Combination Sender and Receiver Module
- Ideal for Hotel Room Audio Systems
- Distributes Power to All Connected Modules
- Automatically Resetting Fuse for Output Voltage
- Ultra-Compact All Metal Construction
- Format-A Sender from TV Fixed Audio Output
- Sends Left and Right Audio Channels
- Unbalanced Stereo Input from Fixed Level Audio Source
- Balanced Audio Input from Mono Amplifier
- High Quality Audio Distributed to Each RJ45 Output
- Two Format-A Outputs on RJ45
- Format-A Receiver Compatible with 2 Pair Senders such as D-TPS8A
- Two -10 dBV stereo unbalanced outputs on RCA connectors
- L (Left) Output From Pair B; R (Right) From Pair C
- The output feeds the AUX input of the television
Inputs (3) | 20 kΩ unbalanced (2, left and right) 100Ω balanced (mono amplified) |
---|---|
Input Connection | Phono Jack (Unbal.) Mini-jack (Bal.) |
Input Level | -10 dBV unbalanced 1 W (8 Ohms) to 10 W (8 Ohms) balanced, 2 W nominal |
Format-A Signal Pairs Used (2) | B, C |
Output | RDL TP Format-A |
Output Connection | RJ45 |
Frequency Response | 10 Hz to 50 kHz (± 0.1 dB) |
THD+N | < 0.05% |
Noise below +4 dBu | < -85 dB |
Crosstalk | < -85 dB (10 Hz to 10 kHz) < -80 dB (10 kHz to 20 kHz) |
Headroom above +4 dBu | > 18 dB |
Receiver Section | |
Input | : RDL FORMAT-A |
Input Connection | RJ45 |
Format-A Signal Pairs Used (2) | B (Left) C (Right) |
Output | 100 Ω unbalanced |
Output Connections (2) | RCA Phono stereo |
Frequency Response | 10 Hz to 40 kHz (± 0.1 dB) |
THD+N | < 0.005% |
Noise below +4 dBu | < -90 dB |
Crosstalk | < 90 dB (1 kHz) <75 dB (20 Hz to 20 kHz) |
Headroom above -10 dBV | > 20 dB |
CMRR | Power (Input and outputs active) |
Power Connection | Power Jack (locking) |
Maximum Load Current | 500 mA |
Power Requirement | 24 Vdc @ 35 mA plus connected loads |
Dimensions | 6.58" (16.7 cm) L 3.25" (8.6 cm) W 1.68" (4.27 cm) H |
Package Type | Cardboard Box |
Tariff code | 8543.70.9860 |
WEEE weight | 0.775 lbs. |
Package Dimensions | 4.375 x 7 x 2.25 in. |
Shipping Weight | 1.005 lbs. |
Documents