Item # ES933PMML
MICROLINE CONDENSER HANGING MICROPHONE W/90° ACCEPTANCE ANGLE,AT8534 WALL/CEILING PLATE POWER MODULE
Item # ES933PMML
MICROLINE CONDENSER HANGING MICROPHONE W/90° ACCEPTANCE ANGLE,AT8534 WALL/CEILING PLATE POWER MODULE
- UM: EA
- Brand: AUDIO-TECHNICA
The ES933 condenser hanging microphone is designed for quality sound reinforcement, professional recording, television, and other demanding sound pickup applications. Its low-profile design and excellent response make it ideally suited for suspending over choirs, instrumental groups and theater stages
- Designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications
- Small size and excellent response are ideal for suspension over choirs, instrumental groups and theater stages
- Available interchangeable elements permit angle of acceptance from 90º to 360º
- Superior off-axis rejection for maximum gain before feedback
- Requires 11V to 52V DC phantom
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Integral UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
|
Element |
Fixed-charge back plate, permanently polarized condenser |
|
Frequency Response |
30-20,000 Hz |
|
Low Frequency Roll Off |
80 Hz, 18 dB/octave |
|
Open Circuit Sensitivity |
-40 dB (10.0 mV) re 1V at 1 Pa |
|
Maximum Input Sound Level |
138 dB SPL, 1 kHz at 1% T.H.D. |
|
Dynamic Range |
109 dB, 1 kHz at Max SPL |
|
Signal-to-Noise Ratio |
65 dB, 1 kHz at 1 Pa |
|
Phantom Power Requirements |
11-52V DC, 2 mA typical |
|
Switches |
Flat, roll-off |
|
Weight (Microphone) |
5.5 g (0.2 oz) |
|
Weight (Power Module) |
81 g (2.9 oz) |
|
Cable |
15.2 m (50') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable, terminated with TA3F-type connector |
|
Dimensions (Power Module) |
92.9 mm (3.66") long, 18.9 mm (0.74") diameter |
|
Dimensions (Microphone) |
27.5 mm (1.08") long, 8.4 mm (0.33") head diameter |
|
Output Connector (Power Module) |
Integral 3-pin XLRM-type |
|
Optional Interchangeable Elements |
ESE-O omnidirectional (360°), ESE-H hypercardioid (100°), ESE-ML MicroLine® (90°) |
Documents
