Item # ERIS PRO 8
PRESONUS ERIS PRO 8 (SINGLE) - 8" POWERED STUDIO MONITOR
Item # ERIS PRO 8
PRESONUS ERIS PRO 8 (SINGLE) - 8" POWERED STUDIO MONITOR
- UM: EA
- Brand: PRESONUS
The Eris Pro 8's symmetric design and consistent acoustic center provides superior phase alignment between components to deliver a wide sweet spot, precise stereo imaging, and symmetrical dispersion patterns, making them ideally suited for immersive Dolby Atmos rooms and stereo mix environments alike.
The Eris Pro 8's coaxial design provides a single acoustic point source that creates a natural listening experience, revealing the subtlest nuances in your recordings, while providing a three-dimensional soundstage, detailed transient response, and lifelike sonic reproduction. Combined with a punchy low-end that defies its compact size, the Eris Pro 8 provides a superior listening experience for both home studios and professional mix rooms.
A 1.25-inch, ultra-low mass, silk-dome tweeter ensures snappy, accurate transient reproduction, while a 8-inch, woven-composite woofer offers tight, clear bass, with plenty of punch and no flab. A ported enclosure and 140w of power allows the Eris Pro 8 to reach down to an astonishing 35 Hz, while a finely detailed transient response and stunning dynamics deliver a natural and less fatiguing experience.
Acoustic tuning controls and a three-way Acoustic Space tuning lets you accurately configure the Eris Pro 8 for your room. Flexible input options enable connection to almost any line-level source, from mixers to audio interfaces and more. Provisions for wall and ceiling mounts make it easy to integrate Eris Pro 8 monitors into any stereo or multi-channel system.
Features
Single point-source coaxial design for wider sweet spot and better phase alignment
8-inch, woven-composite, low-frequency driver
1.25-inch, silk-dome, high-frequency driver
140W, Class AB amplification
35 Hz to 20 kHz frequency response
108 dB SPL (Peak, @ 1 meter
Acoustic Tuning Controls: Acoustic Space (Flat, -2 dB, -4 dB), High Frequency (±6 dB, center 10 kHz, continuously variable), Mid Frequency (±6 dB, center 1 kHz, continuously variable), Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)
XLR and ¼-inch TRS balanced and RCA unbalanced rear-panel inputs
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes of no audio)
Wall and ceiling mountable
Voltage Requirements |
100-240 VAC, 50-60 Hz |
Connection Type |
IEC |
Cabinet Material |
Vinyl-Laminated, Medium-Density Fiberboard |
Audio Switches |
Acoustic Space (Flat, -2 dB, -4 dB)Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave) |
Audio Controls |
Volume High Frequency (±6 dB, center 10 kHz, continuously variable); Mid Frequency (±6 dB, center 1 kHz, continuously variable) |
Peak SPL |
108 dB (@ 1 Meter) |
Crossover Frequency |
3.1 kHz |
Monitor Inputs |
1- Balanced XLR, 1- Balanced 1/4” TRS, 1- Unbalanced RCA |
HF Transducers |
1.25” Silk Dome Tweeter (Coaxial) |
LF Transducers |
8" Woven Glass Fiber Composite (Coaxial) |
Frequency Response |
35 Hz - 20 kHz |
Input Impedance |
10 kO |
Monitor Amplifier Power |
140W Bi-Amped |
Documents