Item # ELITE-15 DM I
CONDITIONER POWER HIGH TENSION 15 AMP DUAL METER
Item # ELITE-15 DM I
CONDITIONER POWER HIGH TENSION 15 AMP DUAL METER
- UM: EA
- Estimated Weight: 19.8
- Brand: FURMAN
Today’s power lines are plagued with RF and EMI noise. When connecting sensitive equipment to your home’s power outlet, AC noise couples into your system’s critical components. This AC noise masks low level signals and cripples performance. Low level content is critical because it relays the crucial harmonics and ambience in audio, as well as the depth and clarity in video. With Furman’s exclusive Linear Filtering Technology, televisions, projectors, DVD players, amplifiers, and processors, are fed by linearly-filtered AC power. This dramatically reduces noise, ensuring consistent peak operation regardless of load conditions or the time of day. For the first time, you will see and hear your theater or audio system as it should be — uncompromised.
Another critical feature is Furman’s exclusive Series Multi-Stage Protection. This virtually maintenance-free surge suppression assures the highest level of AC protection possible, without sacrificing itself when the offending surge is severe — no damaged equipment, no service calls, no down time.
Furman’s digital AC voltage and current meters allow precise measurements of the incoming AC line and current loads. These meters are a valuable asset when monitoring systems that are connected to today’s potentially poor power grids. The meters may be dimmed when monitoring is not required.
The Elite-15 DM i also features remote control capability via 12V triggering, compatible with the 12V triggering devices commonly found in power receivers and pre-amp processors. Additional products (such as a remote subwoofer) can be daisy-chained from the 12V output jack for an additional triggered unit. The 12V triggering feature may be bypassed if desired.
Features
SMP provides the highest level of protection available
LiFT significantly reduces AC line noise
E.V.S. protects equipment from dangerous overvoltage conditions
Zero ground contamination circuitry assures delivery of pure AC
Laboratory grade dual voltage and current meters
12 volt triggering for remote control
|
General |
|
|
Family |
Elite Series |
|
Line Voltage |
120 (Volts) |
|
Number of Outlets |
13 |
|
Number of Isolated Banks |
3 |
|
Outlet Descriptions |
9 (linearly filtered outlets – rear panel – (6) switching – 12V triggered), 4 (linearly filtered outlets with additional ultrasonic filtering for digital or video components – (2) switching – 12V triggered) |
|
Rack Mountable |
Yes |
|
Rack Ears Included |
Yes |
|
Front Panel Meter(s) |
LED voltmeter displays incoming line voltage, LED ammeter displays output current draw |
|
Front Media Light(s) |
No |
|
Control |
On/Off switch on front panel. 12 Volt triggering for remote control. |
|
Voltage Regulation |
No |
|
Compliance |
NRTL-C |
|
USB Charging |
N/A |
|
Low Voltage Trigger |
12 V, In/Out |
|
Dimensions |
4” H x 17” W x 14.75” D (Standard 2 RU height without feet) |
|
Weight |
14 lbs |
|
Power Consumption |
12 Watts for display and control circuits independent of actual load |
|
AC Protection |
|
|
AC Protection Technology |
Extreme Voltage Shutdown, Series Multi-Stage Protection, Non-sacrificial protection with zero ground contamination |
|
Under-Voltage Shutoff |
85V |
|
Over-Voltage Shutoff |
140V ±3V |
|
Maximum Current Rating |
15 (Amps) |
|
Initial Clamping Level |
188 VAC peak @ 3,000 Amps |
|
Filtration |
|
|
Filtration Technology |
LiFT |
|
Filtration Rating |
>40 dB from 10Khz. – 100 kHz. >80 dB from 100 Khz. – 1GHz.(Linear attenuation curve from 0.05 _ 100 ohms line impedance) |
|
Signal Line Protection |
1 Tel, 3 Cable/Satellite |
