Item # DISTRO4(RFV)
ANTENNA DISTRIBUTION SYSTEM - DISTRIBUTES DIVERSITY RF & DC POWER ACROSS 4 RECEIVERS OF ANY BRAND
Item # DISTRO4(RFV)
ANTENNA DISTRIBUTION SYSTEM - DISTRIBUTES DIVERSITY RF & DC POWER ACROSS 4 RECEIVERS OF ANY BRAND
- UM: EA
- Estimated Weight: 9.0
- Brand: RF VENUE
DISTRO4 is a 4-way active antenna splitter plus cascade port with external power that allows you to share one pair of diversity antennas with up to 5 wireless receivers. Built in a full metal housing it ships with 10 BNC cables and 4 dc power cables to connect up your receivers. Multiple DISTRO4s can be connected together up to 25 receivers to a single diversity pair of antennas.
To utilize directional antennas with more than two receivers, an antenna distributor is the right tool for the job. With a single Diversity Fin and DISTRO4, you can avoid crosstalk bleed from multiple whip antennas, and remove questionable wall warts and unneeded powerstrips that can cause other avoidable issues.
Whether you have a small stage setup with 4 wireless microphones, or a larger venue with 25 wireless microphones, DISTRO4 ensures reliable RF signal to your receivers from the A and B outputs of a single Diversity Fin antenna, removing chances of dropping out from multipath reflections and cross-polarization fades.
Features
1RU full rack width to install near receivers.
Reduce IMD and crosstalk while decluttering your rack with regulated 12VDC power to your receivers.
Compatible with all manufacturers.
|
Frequency range |
470-952 MHz |
|
RF output level (gain) |
3 dB (±2 dB) |
|
Cascade output level |
0 dB ~ +2 dB |
|
Output connection isolation |
= 25 dB |
|
Third order intercept point |
24 dBm |
|
Impedance |
50? |
|
Power consumption |
60 W |
|
Input AC voltage |
100~240 V switching |
|
DC over coax (to external antennas |
2-14 VDC |
|
Output DC voltage (to receiver jacks) |
+12 V, 1 A x 4 |
|
Output DC connectors |
5.5mm OD, 2.1mm ID |
|
Dimensions |
19(W) X 2(H) X 10(D) in |
|
Weight |
2.15 Kgs / 4.75lbs |
Documents
