Item # DA-250D CU
DIGITAL POWER AMPLIFIER- 2X 250 W @ 4 OHM (2X 170 W @ 8 OHM)- 1X 500 W BRIDGED @ 8 OHM (1U)
Item # DA-250D CU
DIGITAL POWER AMPLIFIER- 2X 250 W @ 4 OHM (2X 170 W @ 8 OHM)- 1X 500 W BRIDGED @ 8 OHM (1U)
- UM: EA
- Estimated Weight: 15.2
- Brand: TOA ELECTRONICS
The DA-250D is a 2-Channel Digital Power Amplifier featuring lightweight, compact, high power output, and high efficiency. It delivers 250 W × 2 channels (4 O output) using a switching power supply. Each channel is equipped with an independent power section. It can be mounted in an EIA Standard equipment rack (1 unit size).
|
Power Source |
120 V AC |
|
Amplification System |
Class D |
|
Power Consumption |
150 W (based on UL/CSA standards), 650 W (rated output 4 O × 2), 420 W (rated output 8 O × 2) |
|
Input |
2 circuits, 10 kO, XLR-3-31 type connector, CH 1 mode ON/OFF switch (ON: PARALLEL |
|
Rated Output |
2 channels: 250 W × 2 (4 O), 1 channel (BRIDGE): 500 W × 1 (8 O), M4 screw terminal |
|
Frequency Response |
20 - 20 |
|
Total Harmonic Distortion |
0.1% (1 kHz), 0.3% (20 - 20 |
|
Protection Circuit |
Protection against excessive current flow due to overload, short circuit, temperature rise at power amp. heat sink (100? or more (212?F)), temperature rise inside the unit (80? or more (176?F)) |
|
S/N Ratio |
100 dB (A-weighted) |
|
Crosstalk |
70 dB (A-weighted) |
|
LED Indicator |
Power (blue) × 1, Peak (red) × 2 |
|
Cooling |
Forced air cooling |
|
Operating Temperature |
-10? to +40? (14?F to 104?F) |
|
Operating Humidity |
90% RH or less (no condensation) |
|
Finish |
Panel: Aluminum |
|
Dimensions |
482 (W) × 44 (H) × 401.8 (D) mm (18.98 × 1.73" × 15.82) |
|
Weight |
5 kg (11.02 lb) |
|
Accessory |
Power cord (2 m (6.56 ft)) ···1, Tamper-proof cap ···2 |
