Item # CONTROL 60PS/T
150W PENDANT SUBWOOFER WITH BUILT-IN PASSIVE CROSSOVER, 8OHM & 70V / BLACK (PRICE EA, BUY PR)
- MAP: $460.00 / EA
- List Price: $460.00 / EA
- Log in to see if custom discounts apply
- Minimum Order Qty: 2
- Case Qty: 2
Item # CONTROL 60PS/T
150W PENDANT SUBWOOFER WITH BUILT-IN PASSIVE CROSSOVER, 8OHM & 70V / BLACK (PRICE EA, BUY PR)
- UM: EA
- Brand: JBL / HARMAN
The Control 60PS/T pendant subwoofer loudspeaker includes a 200 mm (8 in) long-excursion low-frequency driver with a butyl rubber surround and a polypropylene-coated cone for humidity resistance. It is equipped with a 50 mm (2 in) high-temperature voice coil mounted on a low-mass fiberglass coil former. The unit has a power handling capacity of 150 W and is designed for use in full-range audio systems requiring bass extension. The design aims to provide low distortion and stable performance under high power and high duty cycle conditions.
- 150W direct radiating pendant subwoofer with built-in passive crossover for up to four satellite speakers
- 200 mm (8 in) long-excursion driver
- 8 ohm (150W) and 70V/100V (100W) operation
- Hanging hardware with 4.5 m (15 ft) galvanized steel cable and adjustable clamp
- UL listed (speaker and hanging cable system)
Frequency Range | 42 Hz – 350 Hz |
---|---|
Frequency Response | 55 Hz – 125 Hz |
Power Rating | 300 W Continuous Program Power, 150 W Continuous Pink Noise |
Nominal Sensitivity | 88 dB (2.83V/1m) |
Maximum SPL | 107 dB average, 113 dB peak @ 1 m |
Impedance | 8 ohms |
Transformer Taps | 110W, 55W, 30W, 15W @ 70V; set via rotary tap-selector switch |
Transformer Insertion Loss | approx. 0.94 to 1.10 dB depending on tap |
Standalone Hookup | Connect to input; built-in low-pass filter active; Loop Out in parallel for additional speakers |
Subwoofer-Satellite Hookup | Supports 2 or 4 satellite speakers; satellite outputs high-passed; recommended satellite models specified |
Drivers | 200mm polypropylene-coated paper cone, 50mm high-temp copper voice coil, vented fiberglass resin former |
Enclosure Material | High impact polystyrene |
Baffle | Zinc-plated steel with powder-coat finish and foam backing, removable for painting |
Environmental | Exceeds Mil Spec 810 (humidity, salt spray, temperature, UV); IP44 splash-proof rating |
Input Connectors | Six removable locking 2-pin connectors with screw terminals; max wire 12 AWG; rubber terminal covers included |
Safety Agency | Complies with UL1480, UL1876, IEC60849/EN60849; suspension system certified per UL1598, UL2239, TUV, CSA |
Included Accessories | Two suspension cable systems, six removable locking 2-pin euro-block connectors, six rubber cover boots |
Colors | Black; paintable |
Coverage Angle | 140° conical |
Documents