Item # CONTROL 28-1
8" 2-WAY VENTED SPEAKER, INVISIBALL INSTALLATION SYSTEM (PLUS U-BRACKET ATTACHMENT POINTS)/BLACK
- MAP: $317.00 / EA
- List Price: $391.16 / EA
- Log in to see if custom discounts apply
- Minimum Order Qty: 2
- Case Qty: 2
Item # CONTROL 28-1
8" 2-WAY VENTED SPEAKER, INVISIBALL INSTALLATION SYSTEM (PLUS U-BRACKET ATTACHMENT POINTS)/BLACK
- UM: EA
- Estimated Weight: 32.0
- Brand: JBL / HARMAN
The Control 28-1 is a two-way 8” speaker with rich sonic character, wide coverage, consistent coverage, versatile mounting, and a contemporary high-design look that fits into a wide range of decors, This makes Control 28-1 an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required.
Features
Components:
8” woofer with woven fiberglass cone
1” PEI diaphragm tweeter with fluid cooling
Contemporary, high-design appearance
Built-in InvisiBall mounting hardware*, plus available U-bracket
Weather resistant enclosure and transducers
Wide 100° x 100° coverage
120 Watt power handling (240 Watt program) in direct 8O setting, plus built-in 60 Watt 70V/100V multi-tap transformer.
High fidelity sound character with broad frequency response of 45 Hz – 20 kHz.
|
Frequency Range (-10dB) |
45 Hz to 20 kHz |
|
Frequency Response (±3 dB) |
62Hz - 16 kHz |
|
Power Rating |
240 W Continuous Program (2 hrs) 120 W (480W peak), Continuous Pink Noise (2 hrs) 90 W (360W peak) Continuous Pink Noise (100 hrs) |
|
Maximum Input Voltage |
27.5 V RMS (2 hrs), 55.0 V peak |
|
Maximum SPL (1m) |
112 dB ave. Continuous Pink Noise (118 dB peak) |
|
Sensitivity |
91 dB, 1W/1m (ave. 100 Hz – 10 kHz) |
|
Coverage Angle |
100° x 100° |
|
Directivity Factor (Q) |
7.3 (averaged 1kHz – 16kHz) |
|
Directivity Index (DI) |
8.3dB (averaged 1kHz – 16kHz) |
|
Impedance |
8 ohms (THRU setting) |
|
Crossover Type |
2nd order low-pass, 1st order high-pass, plus conjugate shaping |
|
Transformer Taps |
70V: 60W, 30W, 15W, 7.5W 100V: 60W, 30W, 15W Insertion Loss: <0.94 dB at any tap setting Thru Setting: 8O nominal |
|
Recommended ProtectiveHigh-Pass |
45 Hz high-pass (24 dB/oct) for 8O operation plus 15W and 7.5W taps; 55 Hz for 30W tap; 65 Hz for 60W tap. |
|
Drivers |
LF: 200 mm (8 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure. HF: 25 mm (1 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former. |
|
Enclosure |
High Impact Polystyrene (HIPS) with 10% glass fill, painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance. |
|
Grille |
Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-28WMG-1 (&-WH) available with WeatherMax multi-layer foam and tight-weave mesh vapor barrier backing. |
|
Mounting Hardware |
InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-28WMG-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel. |
|
Outdoor Capability |
IP-44 per IEC529 (IP-55 when installed with the optional MTC-28WMG-1 WeatherMax grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-28WMG-1 WeatherMax grille for breaking up driving rain and for especially difficult environments. |
|
Input Connectors |
Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection. |
|
Safety Agency |
ROHS-compliant; Transformer UL Recognized per UL1876 |
|
Colors |
Black (RAL9004) or white (-WH, RAL9016) |
|
Dimensions (H x W x D) |
386 x 282 x 219 mm (15.2 x 11.1 x 8.6 in); 277 mm (10.9 in) deep total when mounted on InvisiBall wall-mount bracket. |
|
Net Weight (each) |
6.8 kg (15.0 lbs) |
|
Shipping Weight |
15.4 kg (34 lbs) pair-packed (for 2 speakers) |
|
Included Accessories |
InvisiBall™ wall-mounting system), 6 mm x 180 mm hex key |
|
Optional Accessories |
MTC-28UB-1 – Yolk-type U-bracket (&-WH) MTC-28WMG-1 – WeatherMax grille with backing (&-WH) MTC-28/25CM – Ceiling-Mount InvisiBall adapter (&-WH) |
Documents
