Item # CONNECT 1504

4CH AMP X 1500W PER CHANNEL AT 4OHM, 8OHM,70V, 100V / ADVANCED DSP W/FIR CROSSOVERS / IOT DEVICE

  • MAP: $6200 / EA
  • List Price: $6,200.00 / EA
  • Usually ships in 3-7 days
  • Log in to see if custom discounts apply
CONNECT 1504 4CH AMP X 1500W PER CHANNEL AT 4OHM, 8OHM,70V, 100V /  ADVANCED DSP W/FIR CROSSOVERS / IOT DEVICE
Click image to enlarge
CONNECT 1504 4CH AMP X 1500W PER CHANNEL AT 4OHM, 8OHM,70V, 100V /  ADVANCED DSP W/FIR CROSSOVERS / IOT DEVICE

Item # CONNECT 1504

4CH AMP X 1500W PER CHANNEL AT 4OHM, 8OHM,70V, 100V / ADVANCED DSP W/FIR CROSSOVERS / IOT DEVICE

  • UM : EA
  • Brand: LEA PROFESSIONAL

Introducing the CONNECT 1504 high-power IoT-enabled smart amp. This four-channel model drives 1,500w per channel (into 2, 4, and 8ohm as well as 70Vrms and 100Vrms). This addition to the CONNECTSERIES amplifiers is available in NETWORK CONNECT and DANTE CONNECT versions, including both Dante and AES 67 connectivity options. With three different methods of network connection, users can connect using the amplifier’s built-in Wi-Fi Access Point, connecting to an existing Wi-Fi network, or using a Local Area Network Ethernet connection.

Then there’s the Cloud…The CONNECTSERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications and more from any of your personal devices. Just connect your amp to a network and start commanding your systems.

Features

  • 3 WAYS TO CONNECT

    • Built-in Wi-Fi Access Point

    • Existing Wi-Fi Network

    • Local Area Network

  • WEB BROWSER-BASED UI

    • Works on any web browser on any device with no software downloads

  • CLOUD CONTROL

    • Remote control and monitoring from anywhere in the world — no VPN needed.

  • DIRECT LOW-Z & HI-Z

    • 70V or 100V selectable per channel

  • SMART POWER BRIDGE

    • Double the power any any single channel without sacrificing other amp channels

  • UNIVERSAL SWITCH-MODE POWER SUPPLY

    • with PFC — Operation from 100VAC – 240VAC +/-15%

  • ANALOG BALANCED INPUTS

    • Fully routable via input matrix in Web UI or Cloud platform

  • 96KHZ ANALOG DEVICES DSP

    • with linear phase FIR filters, up to 4 seconds of delay, Input Routing, multiple 48dB/Oct crossover filters, 8 Parametric EQ filters, user-configurable speaker limiters, and real-time load monitoring

  • EXTERNAL I/O PORT

    • For Remote ON/OFF and Fault Monitoring

  • HIGHLY EFFICIENT CLASS-D OUTPUT STAGE

    • For low AC Current Draw

AUDIO SPECIFICATIONS

INPUTS

Analog: 4 Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity

THD+N

0.1% (20Hz to 20kHz)

FREQUENCY RESPONSE

20Hz to 20kHz, +/- 0.5 dB @ 4 O, 8 O, 70V, 100V, -2.5dB @ 20kHz at 2 O

SIGNAL TO NOISE LEVEL

105dB (20Hz to 20kHz referenced to 8 O)

CROSSTALK

70dB (20Hz to 20kHz)

AMPLIFIER OUTPUT CLASSIFICATION

Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel

DSP

DSP ARCHITECTURE

Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters

INPUT MATRIX

Routable matrix; any input to any output with primary and secondary input priority

CROSSOVERS

Advanced DSP with Linear Phase Brickwall FIR Crossovers and up to 48dB/Octave IIR Filters (Linkwitz Riley and Butterworth)

PARAMETRIC EQ

8 Band Parametric EQ per channel

OUTPUT DELAY

4 seconds per channel

OUTPUT PROTECTION

DC, VHF, and AC Mains Protection, Overtemp and Current Limiter, fan fault detection

USER ADJUSTABLE LIMITING

Peak voltage and RMS voltage

LOAD MONITORING

Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources

CONTROL, MONITORING, NETWORKING

USER INTERFACE

Web Browser User Interface, 3rd Party API control, or CLOUD control

EXTERNAL I/O

External I/O In: Toggles Remote On/Off, External I/O Out: Indicates Amplifier Health

OPERATION

AC MAINS

100VAC - 240VAC +/- 15% 50Hz or 60Hz

POWER SUPPLY

Universal Switch Mode Power Supply with Power Factor Correction

PHYSICAL SPEC

DIMENSIONS (L X W X H)

Product: 17.88” x 19” x 2U (362mm x 482mm x 2U) (362mm x 482mm x 2U)

WEIGHT

26lbs / 11.8kg | Shipping: 30 lbs / 13.6 kg

COOLING

Front to Rear Variable Fan Speed Cooling, Fan Noise at idle is 50dB @ 1m, Fan Noise at 50% is 57dB @1m, Fan Noise at full speed is 63dB @ 1m

 

 

More Info

Documents

Customers Also Viewed

4CH AMP 1500W PER CHANNEL AT 4OHM, 8OHM,70V, 100V / 80W AT 8OHM / HIZ OR LOWZ SELECTABLE PER CH

CONNECT 1504D

  • 4CH AMP 1500W PER CHANNEL AT 4OHM, 8OHM,70V, 100V / 80W AT 8OHM / HIZ OR LOWZ SELECTABLE PER CH
  • MAP: $7200 / EA
4CH AMP X 700W @ 4OHM, 8OHM, 70V, 100V PER CHANNEL - INTERNAL DSP W/CROSSOVERS, IOT DEVICE

CONNECT 704

  • 4CH AMP X 700W @ 4OHM, 8OHM, 70V, 100V PER CHANNEL - INTERNAL DSP W/CROSSOVERS, IOT DEVICE
  • MAP: $3242 / EA
4CH AMP 700W PER CH AT 2OHM, 4OHM, 8OHM,25V, 70V, 100V / 40W AT 2OHM / HIZ OR LOWZ SELECTABLE PER CH

CONNECT 704D

  • 4CH AMP 700W PER CH AT 2OHM, 4OHM, 8OHM,25V, 70V, 100V / 40W AT 2OHM / HIZ OR LOWZ SELECTABLE PER CH
  • MAP: $4180 / EA
Item Added to Cart
View Cart
Wishlist Updated
View Wishlists
This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our cookies and terms of use policy.