This product is an indoor/outdoor monitor speaker designed for audio playback in various environments. It features a durable enclosure suitable for both interior and exterior applications, providing consistent sound performance across different settings.

• Extended bandwidth, smooth frequency response
• 110° x 85° HF coverage, rotatable horn
• 110 W transformer for 70 V or 100 V lines, 8 ohm thru
• SonicGuard™ overload protection
• 200 mm (8 in) Kevlar cone woofer, 25 mm (1 in) titanium diaphragm compression driver
• InvisiBall™ mounting hardware, ten 6 mm attachment points for suspension and optional U-bracket
• Sealed input panel cover, screwdown input terminals

Frequency Range	37 Hz – 18 kHz (-10 dB)
Power Capacity	300 W Continuous Program Power; 150 W Continuous Pink Noise
Transformer Taps	70 V: 110 W, 55 W, 28 W & 14 W; 100 V: 110 W, 55 W, & 28 W
Frequency Response	45 Hz – 18 kHz (± 3 dB)
Maximum SPL (1m)	Short-Term: 120 dB; Long-Term: 114 dB
Nominal Sensitivity	90 dB (2.83V / 1m)
Coverage Angle	110° H x 85° V, Rotatable
Impedance	8 ohms
Crossover Network	3rd order High Pass, 2nd order Low Pass with impedance compensation, 2.5 kHz crossover frequency
Drivers	LF: 200 (8 in) kevlar cone with pure butyl rubber surround, 50 mm (2 in) voice coil on fiberglass former; HF: 25 mm (1 in) compression driver, pure titanium diaphragm with patented JBL diamond surround
Overload Protection	Full-range power limiting with internal fuse for exceptional overload conditions
Outdoor Capability	IEC 529 IP-X4 rating; exceeds Mil Spec 810 for humidity, salt spray, temperature & UV; passes Mil-Std-202F for salt spray
Input Connectors	Screw-down terminal strip, zinc plated copper base, nickel plated screws/washers; accepts up to 9 mm outside, 4 mm inside open lug (#6, #8, #10), bare wire up to 12 AWG/2.5 mm²
Safety Agency	Transformer listed per UL1876
Colors	White
Mounting Hardware	InvisiBall aimable wall-mounting system included; optional U-bracket