Item # BLX14R/W93-H11
BLX WIRELESS LAPEL SYSTEM WITH BLX4R RECEIVER, BLX1 BODYPACK, & WL93 SUBMINIATURE LAPEL MIC
Item # BLX14R/W93-H11
BLX WIRELESS LAPEL SYSTEM WITH BLX4R RECEIVER, BLX1 BODYPACK, & WL93 SUBMINIATURE LAPEL MIC
- UM: EA
- Estimated Weight: 7.0
- Brand: SHURE
Shure BLX Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Precision-built and available in a variety of configurations, it’s the most accessible way to own the stage.
Includes WL93 lapel microphone, BLX1 bodypack transmitter, BLX4R rack mount receiver, single and dual rackmount kit, two 1/4 wave antennas, zipper bag, power supply, 2 AA batteries, and user guide
Features
Front Panel
audio LED
ready LED
LED Display
group and channel Buttons
power Button
Back Panel
DC Power Jack
Adapter Cord Tie-Off
XLR microphone output jack (MIC?out)
6.35 mm (1/4") instrument level output jack (instrument?out)
BLX1
LED Indicator
power Switch
4-Pin Microphone Input Jack (TA4 connector)
Antenna
group Button
LED Display
channel Button
Battery Compartment
Audio Gain Adjustment
BLX2
LED Indicator
power Button
group Button
channel Button
LED Display
Identification Cap
Battery Compartment
System Specifications
|
Working Range |
91 m (300 ft) Line of Sight, Note: Actual range depends on RF signal absorption, reflection and interference. |
|
Audio Frequency Response |
50 to 15,000 Hz, Note: Dependent on microphone type |
|
Total Harmonic Distortion |
Ref. ±33 kHz deviation with 1 kHz tone, 0.5%, typical |
|
Dynamic Range |
100 dB, A-weighted, typical |
|
Operating Temperature |
-18°C (0°F) to 57°C (135°F), Note: Battery characteristics may limit this range. |
|
Polarity |
Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output. |
