Item # BLX14R/W85-H10
BLX WIRELESS LAPEL SYSTEM WITH BLX4R RECEIVER, BLX1 BODYPACK, & WL85 LAPEL CONDENSER MIC
Item # BLX14R/W85-H10
BLX WIRELESS LAPEL SYSTEM WITH BLX4R RECEIVER, BLX1 BODYPACK, & WL85 LAPEL CONDENSER MIC
- UM: EA
- Estimated Weight: 7.0
- Brand: SHURE
The WL185 premium cardioid lapel microphone brings a new level of sophistication to personal voice reproduction. Like all Microflex family microphones, this lapel uses an interchangeable condenser cartridge, meaning there will always be a lapel to suit your application. With rack-mountable analogue wireless transmission.
Features
Front Panel
audio LED
ready LED
LED Display
group and channel Buttons
power Button
Back Panel
DC Power Jack
Adapter Cord Tie-Off
XLR microphone output jack (MIC?out)
6.35 mm (1/4") instrument level output jack (instrument?out)
BLX1
LED Indicator
power Switch
4-Pin Microphone Input Jack (TA4 connector)
Antenna
group Button
LED Display
channel Button
Battery Compartment
Audio Gain Adjustment
BLX2
LED Indicator
power Button
group Button
channel Button
LED Display
Identification Cap
Battery Compartment
|
Working Range |
91 m (300 ft) Line of Sight, Note: Actual range depends on RF signal absorption, reflection and interference. |
|
Audio Frequency Response |
50 to 15,000 Hz, Note: Dependent on microphone type |
|
Total Harmonic Distortion |
Ref. ±33 kHz deviation with 1 kHz tone, 0.5%, typical |
|
Dynamic Range |
100 dB, A-weighted, typical |
|
Operating Temperature |
-18°C (0°F) to 57°C (135°F), Note: Battery characteristics may limit this range. |
|
Polarity |
Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output. |
Documents
