Item # ATW-T1002
SYSTEM 10 HANDHELD MICROPHONE/TRANSMITTER WITH UNIDIRECTIONAL DYNAMIC ELEMENT, 2.4 GHZ
Item # ATW-T1002
SYSTEM 10 HANDHELD MICROPHONE/TRANSMITTER WITH UNIDIRECTIONAL DYNAMIC ELEMENT, 2.4 GHZ
- UM: EA
- Estimated Weight: 1.5
- Brand: AUDIO-TECHNICA
System 10 Handheld Transmitter
Features
Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
Operates in the 2.4 GHz range – completely free from TV interference
Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility
Up to five chassis (ten receiver units) can be linked and used simultaneously
Each receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurations
Chassis’ System ID Display shows RF signal level, system ID, transmitter battery level, and system link status
Automatic frequency selection for seamless, interference-free operation
Extremely easy operation with instantaneous channel selection, sync, and setup
Three levels of diversity assurance: frequency, time & space
Ground-lift switch helps eliminate audible hum caused by ground loops
|
Overall System |
|
|
Operating Frequencies |
2.4 GHz ISM band (2400 to 2483.5 MHz) |
|
Frequency Response |
20 Hz to 20 kHz Depending on microphone type |
|
Operating Range |
30 m (100') typical, Open range environment with no interfering signals |
|
Total Harmonic Distortion |
<0.05% typical |
|
Operating Temperature Range |
0° C to +40° C (32° F to 104° F), Battery performance may be reduced at very low temperatures |
|
Handheld Transmitter |
|
|
RF Power Output |
10 mW |
|
Spurious Emissions |
Following federal and national regulations |
|
Battery Type |
Two 1.5V AA, not included |
|
Battery Life |
>7 hours (alkaline) Depending on battery type and use pattern |
|
Dimensions |
254.8 mm (10.03") long, 50.0 mm (1.97") diameter |
|
Net Weight |
280 grams (9.9 oz) without batteries |
|
Accessories Included |
AT8456a Quiet-Flex stand clamp |
