Item # ASB6125-WRC
DUAL 15" SUBWOOFER- HIGH POWER, LIGHTWEIGHT FRONT-LOADED SUB - WEATHER RESISTANT IP55
Click image to enlarge
Item # ASB6125-WRC
DUAL 15" SUBWOOFER- HIGH POWER, LIGHTWEIGHT FRONT-LOADED SUB - WEATHER RESISTANT IP55
- UM: EA
- Estimated Weight: 92.0
- Brand: JBL / HARMAN
The ASB6125-WRC is a front-loaded, vented subwoofer enclosure designed to house two JBL 2265H-1 Differential Drive dual voice coil, dual gap 15-inch woofers. Each woofer incorporates neodymium magnets and cones engineered for extended durability.
Features:
- 2 x 15" Differential Drive dual voice coil dual gap, neodymium magnet transducers
- 1600W continuous pink noise power handling
- 6400W peak power handling
- Parallel/Discrete switchable input mode
- Large vent area for high output with low distortion
- FIR Tuning set matches phase profile to full-range models
- Suitable for ground-stacked or suspended applications
- Compatible with stand-alone arrays or AE Series products
| Frequency Range | 32 Hz - 1 kHz |
|---|---|
| Frequency Response | 38 Hz - 1 kHz |
| Transducer Power Rating (AES) | 1600 W (6400 W peak), 2 hrs |
| Input Modes | Drivers Parallel / Drivers Discrete |
| System Power Rating | 1350 W (5400 W peak), 100 hrs |
| Maximum SPL (1m) | 132 dB-SPL continuous avg (138 dB peak) at 35 Hz - 400 Hz |
| System Sensitivity | 100 dB-SPL, 1W (2.0V) @ 1m at 35 Hz - 400 Hz |
| Nominal Impedance | 4ohms in parallel-drive mode; 2 x 8ohms in discrete-drive mode |
| LF Driver | 2 x 2265H-1, 15 in dia., 3 in Dual Coil Dual Gap neodymium Differential Drive drivers |
| Enclosure | Rectangular cabinet, 16 mm exterior grade 11-ply birch plywood |
| Suspension Attachment | 16 points, M10 threaded hardware |
| Finish | Black DuraFlex; white available on request |
| baffle | Powder coated 14 gauge perforated steel with acoustically transparent black foam backing |
| Input Connector | NL4 Neutrik Speakon and CE-compliant covered barrier strip terminals; barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max 9 mm spade lugs; Speakon in parallel with barrier strip for loop-through |
| Environmental | Mil-Std 810; IP-x3 per IEC529 |
| Nominal LF Driver Impedance | 4ohms in parallel-drive mode; 2 x 8ohms in discrete-drive mode |
Documents
×
This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our cookies and terms of use policy.