Item # ASB6115-WRC

COMPACT HIGH-POWER 15” SUBWOOFER SYSTEM. 2265H-1 DIFFERENTIAL DRIVE WOOFER, 3” DUAL VOICE COIL

  • Call for Price
  • Log in to see if custom discounts apply
  • Case Qty: 1
    ASB6115-WRC COMPACT HIGH-POWER 15” SUBWOOFER SYSTEM.  2265H-1 DIFFERENTIAL DRIVE  WOOFER, 3” DUAL VOICE COIL
    Click image to enlarge
    ASB6115-WRC COMPACT HIGH-POWER 15” SUBWOOFER SYSTEM.  2265H-1 DIFFERENTIAL DRIVE  WOOFER, 3” DUAL VOICE COIL

    Item # ASB6115-WRC

    COMPACT HIGH-POWER 15” SUBWOOFER SYSTEM. 2265H-1 DIFFERENTIAL DRIVE WOOFER, 3” DUAL VOICE COIL

    • UM: EA
    • Estimated Weight: 109.3
    • Brand: JBL / HARMAN

    ASB6115-WRC is a compact, front-loaded vented subwoofer enclosure designed for high power audio applications. It contains a JBL 2265H-1 Differential Drive dual voice coil, dual gap 15-inch woofer. The woofer employs a neodymium magnet and a cone constructed for enhanced durability.

    Features:

    • 15" Differential Drive dual voice coil dual gap
    • Neodymium magnet transducer
    • 800W continuous pink noise power handling
    • 3200W peak power handling
    • Large vent area for high output with low distortion
    • FIR tuning set matches phase profile to full-range models
    • Suitable for ground-stacked or suspended applications
    Frequency Range 32 Hz - 1 kHz
    Frequency Response 42 Hz - 1 kHz
    Transducer Power Rating (AES) 800 W (3200 W peak), 2 hrs
    System Power Rating 675 W (2700 W peak), 100 hrs
    Maximum SPL (1m) 35 Hz - 400 Hz: 126 dB continuous avg, 132 dB peak
    System Sensitivity 35 Hz - 400 Hz: 97 dB, 1W (2.83V) @ 1m
    Nominal Impedance 8ohms
    LF Driver 1 x 2265H-1, 15 in dia, 3 in Dual Coil Dual Gap neodymium Differential Drive driver
    Enclosure Rectangular, 16 mm exterior grade 11-ply birch plywood
    Suspension Attachment 16 points (4 top, 4 bottom, 4 each side), M10 threaded hardware
    Finish Black DuraFlex; White available upon request
    baffle Powder coated 14 gauge perforated steel, acoustically transparent black foam backing
    Input Connector NL4 Neutrik Speakon and CE-compliant covered barrier strip terminals; barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max 9 mm spade lugs; Speakon in parallel for loop-through
    Environmental Mil-Std 810; IP-x3 per IEC529
    Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers
    Nominal LF Driver Impedance 8ohms

    Documents

    Loading
    Item Added to Cart
    View Cart
    Wishlist Updated
    View Wishlist
    This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our cookies and terms of use policy.