Item # AM5212/95-WRC
MEDIUM POWER 12” 2-WAY FULL-RANGE LOUDSPEAKER SYSTEM WITH JBL DIFFERENTIAL DRIVE 50.8 MM (2-IN)DUAL
Item # AM5212/95-WRC
MEDIUM POWER 12” 2-WAY FULL-RANGE LOUDSPEAKER SYSTEM WITH JBL DIFFERENTIAL DRIVE 50.8 MM (2-IN)DUAL
- UM: EA
- Estimated Weight: 54.0
- Brand: JBL / HARMAN
AM5212/95-WRC is a 12-inch, 2-way loudspeaker system featuring a rotatable horn with 90° horizontal and 50° vertical coverage. It includes a JBL Differential Drive 262H-1 low-frequency driver with dual voice coils and dual magnetic gaps, measuring 300 mm (12 inches) in diameter. The high-frequency driver is a 2408H-1 compression driver with a 38 mm (1.5 inch) exit and voice coil. The loudspeaker utilizes a PT Progressive Transition waveguide designed for 60° horizontal by 40° vertical coverage, which is rotatable to support both vertical and horizontal mounting orientations. The system incorporates high-slope passive crossover networks to reduce band overlap and features controlled off-axis response for array configuration compatibility.
Features:
- 90° x 50° coverage
- 262H-1 differential drive low-frequency driver
- 2408H-1 high-frequency compression driver
- Large PT progressive transition waveguide for pattern control and low distortion
- Rotatable waveguide for vertical or horizontal orientation
- Bi-amp/passive switchable
- FIR tuning for optimized frequency and phase response
- Coverage consistency
- WRC weather-resistant finishes
| Frequency Range | 37 Hz – 20 kHz |
|---|---|
| Frequency Response | 43 Hz – 18 kHz |
| Coverage Pattern | 60° x 40° / 60° x 60° / 90° x 50° / 100° x 100° / 120° x 60° |
| Crossover Modes | Bi-amp / Passive switchable |
| Passive Crossover Frequency | 1.5 kHz |
| Transducer Power Rating (AES) | LF 400 W (1600 W peak), 2 hrs; 300 W (1200 W peak), 100 hrs; HF 40 W (160 W peak), 2 hrs |
| System Power Rating | Passive mode 300 W (1200 W peak), 100 hrs |
| Maximum SPL (1m) | Bi-amp mode LF 122 dB, HF 131 dB |
| System Sensitivity (1W @ 1m) | Passive mode 96 dB SPL |
| LF Driver | 1 x JBL 262H-1 300 mm driver with 50.8 mm dual voice coil |
| Nominal Impedance | 8ohms |
| Sensitivity (1W @ 1m, operational band) | 97 dB SPL |
| HF Driver | JBL 2408H-1, 38 mm exit compression driver, 38 mm voice coil |
| Sensitivity | 113 dB SPL |
| Waveguide | PT-H126HF-1 |
| Enclosure | Trapezoidal with 15 degree side angles, 16 mm exterior grade 11-ply birch plywood |
| Suspension Attachment | 15 points, M10 threaded hardware |
| baffle | Powder coated 14 gauge perforated steel with acoustically transparent black foam backing |
| Input Connector | NL4 Neutrik Speakon and CE-compliant covered barrier strip terminals; barrier terminals accept up to 5.2 sq mm wire or max width 9 mm spade lugs; Speakon in parallel with barrier strip for loop-through |
| Environmental | Mil-Std 810; IP-x3 per IEC529 |
| Optional Accessories | M10 x 35 mm forged shoulder eyebolts with washers, U-Bracket MTU-3 |
| Nominal LF Driver Impedance | 8ohms |
| Nominal HF Driver Impedance | 8ohms |
Documents
