Item # AM5212/95
MEDIUM POWER 12” 2-WAY FULL-RANGE LOUDSPEAKER SYSTEM WITH JBL DIFFERENTIAL DRIVE 50.8 MM (2-IN)
Item # AM5212/95
MEDIUM POWER 12” 2-WAY FULL-RANGE LOUDSPEAKER SYSTEM WITH JBL DIFFERENTIAL DRIVE 50.8 MM (2-IN)
- UM: EA
- Brand: JBL / HARMAN
AM5212/95 is a 12-inch, 2-way full-range loudspeaker system featuring a 90° x 50° rotatable horn. It includes a 300 mm (12 in) low-frequency driver with JBL Differential Drive technology, which utilizes dual voice coils and dual magnetic gaps. The high-frequency section incorporates a 38 mm (1.5 in) exit compression driver with a 38 mm (1.5 in) voice coil. The loudspeaker uses a PT Progressive Transition waveguide offering 90° horizontal by 50° vertical coverage. The waveguide is rotatable, allowing use in either vertical or horizontal orientation. The system employs high-slope passive crossover networks to minimize band overlap and has controlled off-axis frequency response to improve array performance.
Features:
- 90° x 50° coverage
- 262H-1 differential drive low-frequency driver
- 2408H-1 high-frequency compression driver
- Large PT progressive transition waveguide
- Rotatable waveguide for vertical or horizontal orientation
- Bi-amp/passive switchable
- FIR tuning for optimized frequency and phase response
- Black
| Frequency Range | 37 Hz – 20 kHz |
|---|---|
| Frequency Response (±3 dB) | 43 Hz – 18 kHz |
| Coverage Pattern | 60° x 40° / 60° x 60° / 90° x 50° / 100° x 100° / 120° x 60° |
| Crossover Modes | Bi-amp / Passive switchable |
| Passive Crossover Frequency | 1.5 kHz |
| Transducer Power Rating (AES) | LF: 400 W (1600 W peak), 2 hrs; 300 W (1200 W peak), 100 hrs; HF: 40 W (160 W peak), 2 hrs |
| System Power Rating (Passive mode) | 300 W (1200 W peak), 100 hrs |
| Maximum SPL (1m, Bi-amp mode) | LF: 122 dB; HF: 131 dB |
| System Sensitivity (Passive mode, 1W @ 1m) | 96 dB SPL |
| LF Driver | JBL 262H-1, 12 in driver, 2 in dual voice coil |
| Nominal Impedance | 8ohms |
| Sensitivity (1W @ 1m) | 97 dB SPL |
| HF Driver | JBL 2408H-1, 1.5 in exit compression driver, 1.5 in voice coil |
| HF Sensitivity | 113 dB SPL |
| Waveguide | PT-H126HF-1 |
| Enclosure | Trapezoidal, 16 mm exterior grade 11-ply birch plywood |
| Suspension Attachment | 15 points, M10 threaded hardware |
| baffle | Powder coated 14 gauge perforated steel with acoustically transparent black foam backing |
| Input Connector | NL4 Neutrik Speakon and CE-compliant covered barrier strip terminals; Barrier terminals accept up to 5.2 sq mm wire or max 9 mm spade lugs; Speakon in parallel for loop-through |
| Environmental | Mil-Std 810; IP-x3 per IEC529 |
| Optional Accessories | M10 x 35 mm forged shoulder eyebolts with washers; U-Bracket MTU-3 |
| Nominal LF Driver Impedance | 8ohms |
| Nominal HF Driver Impedance | 8ohms |
Documents