Item # AM5212/64-WH

MEDIUM POWER 12” 2-WAY FULL-RANGE LOUDSPEAKER SYSTEM WITH JBL DIFFERENTIAL DRIVE 50.8 MM (2-IN)

  • MAP: $2,420.00 / EA
  • List Price: $2,420.00 / EA
  • Log in to see if custom discounts apply
  • Case Qty: 1
    AM5212/64-WH MEDIUM POWER 12” 2-WAY FULL-RANGE LOUDSPEAKER SYSTEM WITH JBL DIFFERENTIAL DRIVE  50.8 MM (2-IN)
    Click image to enlarge
    AM5212/64-WH MEDIUM POWER 12” 2-WAY FULL-RANGE LOUDSPEAKER SYSTEM WITH JBL DIFFERENTIAL DRIVE  50.8 MM (2-IN)

    Item # AM5212/64-WH

    MEDIUM POWER 12” 2-WAY FULL-RANGE LOUDSPEAKER SYSTEM WITH JBL DIFFERENTIAL DRIVE 50.8 MM (2-IN)

    • UM: EA
    • Brand: JBL / HARMAN

    AM5212/64-WH is a 12-inch, 2-way full-range loudspeaker system featuring a 262H-1 low frequency driver with JBL Differential Drive dual voice coil and dual magnetic gap technology. The low frequency driver has a 300 mm (12 in) cone diameter. The high frequency section includes a 2408H-1 compression driver with a 38 mm (1.5 in) exit and a 38 mm (1.5 in) voice coil. The loudspeaker employs a PT Progressive Transition waveguide providing 60° horizontal by 40° vertical dispersion. The waveguide is rotatable, allowing the unit to be configured for vertical or horizontal orientation. The system uses high-slope passive crossover networks to minimize frequency band overlap. The design delivers controlled off-axis response suitable for array configurations.

    Features:

    • 60° x 40° coverage
    • 262H-1 differential drive low-frequency driver
    • 2408H-1 high-frequency compression driver
    • Large PT progressive transition waveguide for pattern control and low distortion
    • Rotatable waveguide for vertical or horizontal orientation
    • Bi-amp/passive switchable
    • FIR tuning for optimized frequency and phase response
    • White
    Frequency Range 37 Hz – 20 kHz
    Frequency Response 43 Hz – 18 kHz
    Coverage Pattern 64: 60° x 40°, 66: 60° x 60°, 95: 90° x 50°, 00: 100° x 100°, 26: 120° x 60°
    Crossover Modes Bi-amp/Passive switchable
    Passive Crossover Frequency 1.5 kHz
    Transducer Power Rating (AES) LF 400 W (1600 W peak), 2 hrs; 300 W (1200 W peak), 100 hrs; HF 40 W (160 W peak), 2 hrs
    System Power Rating Passive mode 300 W (1200 W peak), 100 hrs
    Maximum SPL (1m) Bi-amp mode LF 122 dB; HF 131 dB
    System Sensitivity (1W @ 1m) Passive mode 96 dB SPL
    LF Driver 1 x JBL 262H-1 dual voice coil
    Nominal Impedance 8ohms
    Sensitivity (1W @ 1m, operational band) 97 dB SPL
    HF Driver JBL 2408H-1, 38 mm exit compression driver, 38 mm voice coil
    Sensitivity 113 dB SPL
    Waveguide PT-H126HF-1
    Enclosure Trapezoidal, 15 degree side angles, 16 mm exterior grade 11-ply birch plywood
    Suspension Attachment 15 points, M10 threaded hardware
    FinishWhite DuraFlex finish
    baffle Powder coated 14 gauge perforated steel with acoustically transparent black foam backing
    Input Connector NL4 Neutrik Speakon and CE-compliant covered barrier strip terminals, barrier accepts up to 5.2 sq mm wire or max 9 mm spade lugs; Speakon in parallel for loop-through
    Environmental Mil-Std 810; IP-x3 per IEC529
    Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers, U-Bracket MTU-3
    Nominal LF Driver Impedance 8ohms
    Nominal HF Driver Impedance 8ohms

    Documents

    Loading
    Item Added to Cart
    View Cart
    Wishlist Updated
    View Wishlist
    This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our cookies and terms of use policy.