Item # AM5212/64

MEDIUM POWER 12” 2-WAY FULL-RANGE LOUDSPEAKER SYSTEM WITH JBL DIFFERENTIAL DRIVE 50.8 MM (2-IN)

  • MAP: $2,420.00 / EA
  • List Price: $2,420.00 / EA
  • Log in to see if custom discounts apply
  • Case Qty: 1
    Click image to enlarge

    Item # AM5212/64

    MEDIUM POWER 12” 2-WAY FULL-RANGE LOUDSPEAKER SYSTEM WITH JBL DIFFERENTIAL DRIVE 50.8 MM (2-IN)

    • UM: EA
    • Brand: JBL / HARMAN

    The AM5212/64 is a medium power, lightweight, 2-way, full-range loudspeaker system. It features a JBL Differential Drive dual voice coil and dual magnetic gap 262H-1 low frequency driver with a 300 mm (12 in) diameter. The high frequency driver is a 2408H-1 compression driver with a 38 mm (1.5 in) exit and a 38 mm (1.5 in) voice coil. The loudspeaker uses a large format PT Progressive Transition waveguide that provides dispersion coverage of 60° horizontal by 40° vertical. The waveguide is rotatable, allowing use in either vertical or horizontal orientation. High-slope passive crossover networks minimize frequency band overlap. The design offers controlled off-axis response to optimize array configuration.

    Features:

    • 60° x 40° Coverage
    • 262H-1 Differential Drive Low-Frequency Driver
    • 2408H-1 High-Frequency Compression Driver
    • Large PT Progressive Transition waveguide for pattern control and low distortion
    • Rotatable waveguide for vertical or horizontal orientation
    • Bi-Amp/Passive Switchable
    • FIR Tuning for optimized frequency and phase response
    • Coverage consistency
    • Sound quality
    • Black
    Frequency Range (-10dB) 37 Hz – 20 kHz
    Frequency Response (±3 dB) 43 Hz – 18 kHz
    Coverage Pattern 60° x 40° / 60° x 60° / 90° x 50° / 100° x 100° / 120° x 60°
    Crossover Modes Bi-amp / Passive switchable
    Passive Crossover Frequency 1.5 kHz
    Transducer Power Rating (AES) LF 400 W (1600 W peak), 2 hrs; 300 W (1200 W peak), 100 hrs; HF 40 W (160 W peak), 2 hrs
    System Power Rating (Passive mode) 300 W (1200 W peak), 100 hrs
    Maximum SPL (1m) Bi-amp mode LF 122 dB, HF 131 dB
    System Sensitivity (1W @ 1m, Passive mode) 96 dB SPL
    LF Driver 1 x JBL 262H-1 300 mm driver with 2 in dual voice coil
    Nominal Impedance 8ohms
    Sensitivity (1W @ 1m, operational band) 97 dB SPL
    HF Driver JBL 2408H-1, 38 mm exit compression driver, 38 mm voice coil
    Sensitivity 113 dB SPL
    Waveguide PT-H126HF-1
    Enclosure Trapezoidal with 15° side angles, 16 mm exterior grade 11-ply birch plywood
    Suspension Attachment 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware
    FinishBlack DuraFlex finish
    baffle Powder-coated 14 gauge perforated steel with acoustically transparent black foam backing
    Input Connector NL4 Neutrik Speakon and CE-compliant covered barrier strip terminals; barrier terminals accept up to 5.2 sq mm wire or max 9 mm spade lugs; Speakon parallel with barrier strip for loop-through
    Environmental Mil-Std 810; IP-x3 per IEC529
    Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers, U-Bracket MTU-3
    Nominal LF Driver Impedance 8ohms
    Nominal HF Driver Impedance 8ohms

    Documents

    Loading
    Item Added to Cart
    View Cart
    Wishlist Updated
    View Wishlist
    This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our cookies and terms of use policy.