Item # DPA1202

2CH/3CH/4CH 1200W NETWORKABLE POWER AMPLIFIER WITH DSP -70V, 100V, 4O & 8O OPTIONS

  • MAP: $1662.99 / EA
  • List Price: $2,075.99 / EA
  • In Stock
  • Log in to see if custom discounts apply
  • Case Qty: 2
DPA1202 2CH/3CH/4CH 1200W NETWORKABLE POWER AMPLIFIER WITH DSP -70V, 100V, 4O & 8O OPTIONS
DPA1202 2CH/3CH/4CH 1200W NETWORKABLE POWER AMPLIFIER WITH DSP -70V, 100V, 4O & 8O OPTIONS
Click image to enlarge
DPA1202 2CH/3CH/4CH 1200W NETWORKABLE POWER AMPLIFIER WITH DSP -70V, 100V, 4O & 8O OPTIONS
DPA1202 2CH/3CH/4CH 1200W NETWORKABLE POWER AMPLIFIER WITH DSP -70V, 100V, 4O & 8O OPTIONS

Item # DPA1202

2CH/3CH/4CH 1200W NETWORKABLE POWER AMPLIFIER WITH DSP -70V, 100V, 4O & 8O OPTIONS

  • UM : EA
  • Estimated Weight: 7.9
  • Brand: ATLAS IED

The AtlasIED DPA1202 features a combination of flexibility, performance and control to provide high value features for applications that require more than just great sound. The network based DPA1202 is a DSP controlled 4-channel amplifier that can be configured in three different amplification arrangements to meet the design requirements of any installation.

 

The unit is factory preconfigured in a two-channel 70V mode. If the design requires four channels of low impedance amplification, the amplifier can be configured as 4-channel model with either 4O or 8O load impedances. Many system designs require both low and high impedance amplification. This unit can be configured to deliver 70V/100V for a paging/background system on a single channel plus two additional 4O/8O amplifier channels for foreground stereo applications.

 

FEATURES

  • Configurable for Use as 2-Channel 70.7V Amplifier
  • Configurable for Use as 4-Channel 4O Amplifier
  • Configurable for Use as Single Channel 70.7V and 2-Channel 4O Amplifier
  • Networkable with On Board GUI
  • Configurable DSP Via GUI
  • Site Manager Software with Network Auto-Discovery Fault Reporting, Input & Output Status, Standby Status and Remote Activation via a Scheduler Timer
  • User Page with Assignable Input & Output Level Control
  • Mute Assignments Triggered Via Audio Signal or Contact Closure
  • Audio Sense Turn-On/Off
  • Four Balanced Inputs
  • Optional Accessory Card Slot for 4-Channel Dante™ Receiver Card or (2) Mic / Line, (2) Aux Input Card
  • PC, iOS, & Android Compatible

 

SPECIFICATIONS

Power Output

2 x 600-Watts @ 70.7V

Power Output

2 x 600-Watts @ 100V

Power Output

4 x 300-Watts @ 4O

Power Output

4 x 150-Watts @ 8O

Power Output

1 x 600-Watts @ 70.7V, 2 x 300-Watts @ 4O

Power Output

1 x 600-Watts @ 100V, 2 x 300-Watts @ 4O

Amplifier Topology

Class AB Switching Hybrid -BASH

Input Sensitivity

750mV Balanced, 0dBU

Input impedance

Balanced 40k

Maximum Input Signal

+14dBU Inputs 1-4, +7dBU Inputs 5-8 with Dante

THD

1% @ Rated Output

Frequency Response

-3dB 20Hz - 20kHz (DSP Filters Set to Flat)

Signal to Noise Ratio

-100dB Below Rated output (A-Weighted)

Crosstalk

70dB @ 1kHz

Voltage

110V - 120V & 220V - 240V Auto Switch Over, 50/60Hz

Idle Current

38W

Rack Units

1

 

 

 


Documents

Customers Also Bought

PASSIVE SUMMING CABLE FOR AA SERIES AMPLIFIERS 5.5MM PHOENIX CONNECTOR

AA-YSUM

  • PASSIVE SUMMING CABLE FOR AA SERIES AMPLIFIERS 5.5MM PHOENIX CONNECTOR
  • MAP: $54.99 / EA
ANALOG MIXER ACCESSORY CARD FOR USE WITH DPA2402/DPA1202/DPA602

DPA-AMIX

  • ANALOG MIXER ACCESSORY CARD FOR USE WITH DPA2402/DPA1202/DPA602
  • MAP: $368.99 / EA
DANTE ENABLED ACCESSORY CARD FOR USE WITH DPA2402/DPA1202/DPA602 & AZA404/AZA804

DPA-DAC4

  • DANTE ENABLED ACCESSORY CARD FOR USE WITH DPA2402/DPA1202/DPA602 & AZA404/AZA804
  • MAP: $548.99 / EA
WALL PLATE 10KOHM LEVEL CONTROL / WHITE DECOR STYLE PLATE / FITS A SINGLE GANG ELECTRICAL OUTLET

WPD-VC10K

  • WALL PLATE 10KOHM LEVEL CONTROL / WHITE DECOR STYLE PLATE / FITS A SINGLE GANG ELECTRICAL OUTLET
  • MAP: $47.99 / EA

Customers Also Viewed

4CH POWER AMPLIFIER 4 X 1000W @ 4OHMS, 500W @ 8OHMS, 1000W @ 2OHMS

CA1.04

  • 4CH POWER AMPLIFIER 4 X 1000W @ 4OHMS, 500W @ 8OHMS, 1000W @ 2OHMS
  • MAP: $2299 / EA
4CH POWER AMPLIFIER 300W @ 4 OHM ANALOG, 70V 100V, INTEGRATED DSP

DCI4X300

  • 4CH POWER AMPLIFIER 300W @ 4 OHM ANALOG, 70V 100V, INTEGRATED DSP
  • MAP: $2623.05 / EA
4CH 2600W COMMERCIAL AMPLIFIER / 4 X 650W @ 70V/100V AND 4/8 OHM - 4-BALANCED INPUTS / 2RU

HPA2604

  • 4CH 2600W COMMERCIAL AMPLIFIER / 4 X 650W @ 70V/100V AND 4/8 OHM - 4-BALANCED INPUTS / 2RU
  • MAP: $2092.99 / EA
4CH POWER AMPLIFIER 4 X 150W @ 8 / 4 / 2OHMS, 4 X 150W @ 70V/ 100V/ 25V

NX1504

  • 4CH POWER AMPLIFIER 4 X 150W @ 8 / 4 / 2OHMS, 4 X 150W @ 70V/ 100V/ 25V
  • MAP: $1899 / EA
Item Added to Cart
View Cart
Wishlist Updated
View Wishlists
This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our cookies and terms of use policy.