Item # UA844+SWB/LC
FIVE-WAY ACTIVE ANTENNA SPLITTER & POWER DISTRIBUTION SYSTEM FOR QLX-D, ULX-D, SLX-D, & BLXR
Item # UA844+SWB/LC
FIVE-WAY ACTIVE ANTENNA SPLITTER & POWER DISTRIBUTION SYSTEM FOR QLX-D, ULX-D, SLX-D, & BLXR
- UM: EA
- Estimated Weight: 8.0
- Brand: SHURE
Wideband UHF (470-952 MHz) Five-Way Active Antenna Splitter and Power Distribution System, external power supply. For QLX-D, ULX-D, SLX-D, and BLX (BLX4R only) receivers.
The Shure Model UA844+SWB is an antenna distribution system that allows for the expansion of wireless microphone systems by splitting one pair of antennas to multiple receivers. It also amplifies RF signals to compensate for insertion loss that results from splitting signal power to multiple outputs. A single UA844+SWB system can support up to five wireless receivers. A maximum of five UA844+SWB systems may be used in a two-tiered configuration.
Model Number: UA844+SWB (replaces discontinued model UA844US)
The UA844+SWB/LC option comes with the four push on DC cables and no antenna cables. It is recommended for use with the BLX (BLX4R only), SLX-D and QLX-D wireless systems. To connect the receiver antenna ports to the UA844+SWB/LC, use the BNC-BNC antenna cables supplied with each receiver.
Features
Front-mounting antenna hardware
Rack-mounting hardware
External power supply
Antenna cables for receiver connections
|
Power Requirements |
14 to 18 V DC |
|
DC Output |
14 to 18 V DC (x4) |
|
Output Current |
Combined total from all DC outputs, 2.5 A, maximum |
|
Operating Temperature Range |
-18°C (0°F) to 63°C (145°F) |
|
Dimensions |
45 x 483 x 172 mm (H x W x D) |
|
Net Weight |
1.62 kg (3.6 lbs) |
|
Connector Type |
BNC |
|
RF Frequency Range |
model dependent, 174 to 1805 MHz |
|
Bias Voltage |
15 V DC (150 mA, maximum) (x2) |
|
Impedance |
50 O |
|
RF Frequency Range |
model dependent, 174 to 1805 MHz |
|
Output Intercept Point |
21 dBm, typical |
|
Connector Type |
BNC |
|
Impedance |
50 O |
|
Output Connector Isolation |
30 dB, typical |
|
Gain |
Input to any output port (Unused ports terminated in 50 Ohm), -1 to +1 dB |
Documents
